Welding & Coating Inspector will need to have the dual certifications for both the Welding Inspector and Coating Inspector as described herein.
The Welding Inspector reports directly to the Chief Inspector. This person will be knowledgeable of the specifications governing the project under construction. It includes any references to codes, standards, etc., in other publications, e.g., API, ASME, ASTM, etc. They will also need to be knowledgeable in inspecting pipeline welding, hydrostatic testing preparation, etc. They will need to review client’s specifications and procedures for the above-mentioned tasks and ensure the Third-Party Contractor performs these tasks in compliance with the specification and procedures. They will also need to work with the client and its Third-Party Contractors to complete the necessary Work.
Certifications
shall maintain certification through the American Welding Society (AWS) or National Welding Inspection School (“CWI/CPWI”).
Functions and Responsibilities
Performs duties as designated by the Chief Inspector in conformance with the job requirements outlined in the client’s specifications.
Prepares all appropriate reports, cataloging the day’s welding progress, repairs, and supplemental information. These reports become records of construction.
The following reports shall be completed and maintained:
Daily Report
Qualified & Disqualified Welders List
Welder Qualification Record
Weld Log
The WI will be expected to have the following equipment:
Device with the ability for taking and providing daily pictures as documentation of inspected activities.
Welding Inspector will be required to always have client Specification in their possession.
A digital or analog type of meter for checking amperage and voltage.
A stopwatch and tape for checking travel speed.
A Temp. Stick or handheld temperature gun for checking the pipe temperature.
Diameter or Pi Tape
Digital or Dial Caliper
Micrometer
Pipe Bevel and Land Gage
Magnifying Glass
Paint Markers
Handheld Mirror
Calculator
Welding Inspectors will need to be knowledgeable in inspecting pipeline welding, hydrostatic testing preparation, etc. The Welding Inspector will need to review client’s specifications and procedures for the above-mentioned tasks and ensure the Third-Party Contractor performs these tasks in compliance with the specification and procedures. The Welding Inspector will need to Work with client and its Third-Party Contractors to complete the necessary work. The Welding Inspector may be expected to have the following equipment:
Device with the ability for taking and providing daily pictures as documentation of inspected activities.
Welding Inspector will be required to always have client’s Specification in their possession.
Welding Inspectors shall maintain certification through the AWS or CWI/CPWI.
A digital or analog type of meter for checking amperage and voltage.
A stopwatch and tape for checking travel speed.
A Temp. Stick or handheld temperature gun for checking the pipe temperature.
Diameter or Pi Tape
Digital or Dial Caliper
Inside Diameter Micrometer
Outside Calipers
Pipe Bevel and Land Gage
Magnifying Glass
Paint Markers
Handheld Mirror
Calculator
Coating Inspectors will need to be knowledgeable in client’s Coating and Painting Specifications (for example, SP-2888 coating application), Fusion-bonded epoxy (“FBE”) spray coating application, and epoxy paint application as outlined in the Coating and Painting Specification. The Coating Inspector will need to review client’s Coating and Painting Specification and ensure the Third-Party Contractor performs these tasks in compliance. The Coating Inspector will need to work with the client and its Third-Party Contractors to complete the necessary work.
The Coating Inspector will be expected to have the following equipment and qualifications:
Device with the ability for taking and providing daily pictures as documentation of inspected activities.
Daily Logbook for taking daily notes and noting any issues.
Coating Inspector will be required to always have in their possession client provided Coating and Painting Specifications.
Coating Inspectors will be required to have a NACE-certified Coating Inspector Level I or one of the following equals:
Formal education in corrosion control from the NACE International (NACE) with an active minimum certification level equivalent to the following: NACE Corrosion Technologist or NACE Cathodic Protection Technician.
Formal education in corrosion control from Appalachian Underground Corrosion Short Course with evidence of successfully passing the Basic, Intermediate, and Advanced Courses.
Three or more years of experience in coating application work—with emphasis on buried coatings.
Equipment needs for Coating Inspectors:
Dew Point, Ambient, and Surface Temperature Meter
Humidity measurement meter
Thickness Gauge to measure wet film thickness and dry film thickness (0—40 mils)
Hardness Tester
Blasting profile strips/gauge to measure pipe surface roughness
Ability to stand and walk on flat and/or uneven terrain for extended periods of time.
Ability to perform repetitive movements such as bending, crouching, and kneeling.
Ability to work in a fast-paced environment and handle changing priorities.
Must be able to wear and work in personal protective equipment
Tolerance to work in various environmental conditions (e.g., heat, cold, noise, dust, rain, snow).
Ability to safely operate inspection tools, laptops, and mobile devices.
This position requires the use of a personal vehicle for work-related travel. A valid driver’s license, proof of auto insurance, and a reliable vehicle are required.
Ability to stand and walk on flat and/or uneven terrain for extended periods of time.
Ability to perform repetitive movements such as bending, crouching, and kneeling.
Ability to work in a fast-paced environment and handle changing priorities.
Must be able to wear and work in personal protective equipment
Tolerance to work in various environmental conditions (e.g., heat, cold, noise, dust, rain, snow).
Ability to safely operate inspection tools, laptops, and mobile devices.
This position requires the use of a personal vehicle for work-related travel. A valid driver’s license, proof of auto insurance, and a reliable vehicle are required.
Other duties and responsibilities may be required throughout job assignment.
**BJ Inspections Inc. is an equal opportunity employer.