Back to search

Electrical Engineer IV

Hands-on electrical engineer to develop electrical hardware for next-generation wearable and consumer-device research, focusing on circuit design, PCB development, and system integration.

  • Redmond, Washington, United States
  • Contract
  • On-site
  • Posted Nov 17, 2026
INDUSTRYEngineeringElectrical Engineering

Responsibilities

  • Translate system requirements into electrical architectures, power budgets, schematics, component selections, BOMs, PCB layout constraints, and verification plans.
  • Design analog and mixed-signal circuits, sensor interfaces, microcontroller interfaces, clock/reset circuits, level translation, power sequencing, and protection circuitry.
  • Design and review compact PCBs for controlled impedance, high-speed interfaces, grounding, return paths, decoupling, shielding, thermal management, and manufacturability.
  • Perform hands-on assembly, fine-pitch surface-mount soldering, rework, prototype modifications, board bring-up, and root-cause failure analysis.
  • Develop transmitter and receiver hardware for inductive and resonant wireless power transfer.
  • Integrate DC-DC converters, PMICs, battery charging, fuel gauging, current/voltage sensing, load management, and temperature monitoring.
  • Integrate and bring up UWB transceivers or modules.
  • Integrate 5G NR/LTE modem modules or chipsets.
  • Integrate RF front ends, filters, switches, duplexers, matching/tuning networks, MIMO/diversity antenna paths.
  • Validate supply integrity and thermal behavior during cellular transmit bursts.
  • Bring up Wi-Fi/Bluetooth hardware and evaluate connectivity, throughput, power consumption.
  • Develop test fixtures and Python-based instrument automation for repeatable electrical, RF, power-transfer, and system-level measurements.
  • Support EMC/ESD, RF exposure, wireless emissions, interoperability, and product-safety evaluation.

Requirements

  • BS in Electrical Engineering
  • BS in Computer Engineering
  • Experience in a Wearable hardware
  • Experience in a Consumer-device research
  • Experience in a SaaS

Nice to have: HDI PCB, flex/rigid-flex PCBs, Qi/Qi2, IEEE 802.15.4/802.15.4z UWB hardware, cellular MIMO, SPICE/circuit simulation

Skills

Circuit designPCB developmentAnalog circuit designMixed-signal circuit designPower-electronicsRF systemsWi-FiUWB transceivers5G cellular modemsAltiumAllegroOrCADPythonOscilloscopesDifferential/current probesElectronic loadsPower measurementsNetwork analyzersSpectrum analyzers

Benefits

  • Contingent-worker role

More jobs nearby

Full description

Duration: 12 months Job Description: About the Role: This contingent-worker role supports Clients Reality Labs in developing electrical hardware for next-generation wearable and consumer-device research. We are looking for a hands-on electrical engineer who can turn concepts into functioning hardware through circuit design, PCB development, assembly, bring-up, debugging, and system integration. The role combines broad analog, digital, mixed-signal, and power-electronics capability with practical experience working with RF systems, including Wi-Fi, UWB transceivers, and 5G cellular modems. You will develop wireless power transfer hardware and integrate connectivity, sensing, processing, and battery-power subsystems into compact prototypes. The emphasis is board-level EE design, integration, and validation, not RF IC design or cellular modem algorithm development. You will partner with RF, antenna, firmware, software, mechanical, thermal, and industrial design specialists to deliver reliable research hardware and technology demonstrations. Responsibilities: Translate system requirements into electrical architectures, power budgets, schematics, component selections, BOMs, PCB layout constraints, and verification plans. Design analog and mixed-signal circuits, sensor interfaces, microcontroller interfaces, clock/reset circuits, level translation, power sequencing, and protection circuitry. Design and review compact PCBs for controlled impedance, high-speed interfaces, grounding, return paths, decoupling, shielding, thermal management, and manufacturability; coordinate flex/rigid-flex integration where needed. Perform hands-on assembly, fine-pitch surface-mount soldering, rework, prototype modifications, board bring-up, and root-cause failure analysis. Develop transmitter and receiver hardware for inductive and resonant wireless power transfer, including driver/inverter stages, gate drivers, switching devices, resonant compensation and matching networks, rectification, and output regulation. Select and characterize coils, magnetic materials, shielding, and compensation components with EM and mechanical specialists; evaluate inductance, Q, coupling, losses, detuning, alignment, gap, and nearby-metal effects. Integrate DC-DC converters, PMICs, battery charging, fuel gauging, current/voltage sensing, load management, and temperature monitoring; validate startup, load transients, efficiency, and battery-powered operation. Implement and test control, power negotiation or feedback, and protection functions appropriate to the architecture, including overvoltage, overcurrent, overtemperature, receiver removal, and foreign-object detection. Measure end-to-end power-transfer efficiency with clearly defined input/output boundaries; characterize thermal rise, operating margins, and performance across load, placement, and environmental conditions. Integrate and bring up UWB transceivers or modules, including supply rails, clocks, reset/interrupt lines, SPI or other host interfaces, RF paths, matching networks, and antenna connections. Work with firmware and antenna engineers to validate UWB communication and ranging; support antenna-delay calibration, timestamp integrity, and characterization of range, accuracy, repeatability, and orientation effects. Characterize transmit spectra, receiver performance, packet-error rate, and interference susceptibility; separate hardware limitations from firmware, calibration, multipath, and non-line-of-sight effects. Integrate 5G NR/LTE modem modules or chipsets, primarily for sub-6 GHz platforms, following vendor reference designs and hardware requirements for PMICs, clocks, boot/reset sequencing, debug access, and SIM/eSIM interfaces. Implement modem-to-host connections such as USB and PCIe where applicable; validate high-speed signal integrity, enumeration, control interfaces, and device operation with firmware and software teams. Integrate RF front ends, filters, switches, duplexers, matching/tuning networks, MIMO/diversity antenna paths, and RF control interfaces such as MIPI RFFE where applicable, in partnership with RF specialists. Validate supply integrity and thermal behavior during cellular transmit bursts, sustained data transfer, sleep/wake transitions, and peak-current events; debug resets, voltage droop, and power-consumption issues. Bring up Wi-Fi/Bluetooth hardware and evaluate connectivity, throughput, power consumption, transmit/receive performance, and coexistence with cellular and UWB radios. Use vendor diagnostics and appropriate RF test equipment to support measurements such as output power, receiver sensitivity, EVM, adjacent-channel leakage, and packet/block-error rate; troubleshoot antenna-path loss, desense, and spurious emissions. Develop test fixtures and Python-based instrument automation for repeatable electrical, RF, power-transfer, and system-level measurements; document calibration, fixture losses, and measurement uncertainty. Investigate interactions between wireless power switching, DC-DC converters, digital clocks, and radios; mitigate conducted/radiated noise, receiver desense, and coexistence issues. Support EMC/ESD, RF exposure, wireless emissions, interoperability, and product-safety evaluation with the relevant specialists; prepare hardware and evidence for applicable certification testing. Coordinate component sourcing, PCB fabrication, assembly, vendor technical support, and design revisions; maintain design files, bring-up procedures, test reports, and reproducible handoffs. Own prototypes from schematic capture through fabrication, assembly, bring-up, integration, and live demonstration. Deliver repeatable, demonstration-ready hardware for research reviews and leadership presentations; identify technical risks early and iterate against agreed milestones. Communicate measured performance, design trade-offs, limitations, and next steps clearly to technical and non-technical stakeholders. Experience: BS in Electrical Engineering, Computer Engineering, or a related field, or equivalent practical experience; 8 years of hands-on electrical hardware design, development, and debugging experience. Experience taking analog, digital, mixed-signal, and power PCBs from schematic and layout review through bring-up and validation; proficiency with Altium, Allegro, OrCAD, or equivalent ECAD tools. Hands-on experience working with RF systems, including Wi-Fi and cellular hardware, with practical 5G modem board/module integration, testing, or troubleshooting experience. Experience integrating or bringing up UWB transceiver hardware and validating its host interfaces, RF connections, and communication or ranging functionality. Experience designing and validating wireless power transfer hardware or closely related resonant power electronics, including magnetics, switching/rectification, regulation, and efficiency/thermal measurements. Skillsets: Working knowledge of RF signal paths, impedance matching, antenna interfaces, grounding, shielding, noise coupling, power integrity, and high-speed signal integrity; ability to work effectively with RF and antenna specialists. Experience with battery-powered systems, DC-DC conversion, power sequencing, protection circuits, and embedded interfaces such as I2C, SPI, UART, USB, or PCIe. Proficiency with oscilloscopes, differential/current probes, electronic loads, power measurements, network analyzers, and spectrum analyzers; systematic board- and system-level debugging skills. Hands-on surface-mount soldering/rework and prototype assembly skills; ability to build test fixtures and automate measurements using Python or equivalent tools. Demonstrated ability to deliver functioning integrated prototypes, document results, and collaborate across electrical, firmware, software, and mechanical disciplines. Education: BS in Electrical Engineering, Computer Engineering, or a related field, or equivalent practical experience. Additional Qualifications: Experience with compact wearable hardware, HDI or flex/rigid-flex PCBs, advanced packaging, low-noise sensor interfaces, and constrained battery/thermal budgets. Experience with Qi/Qi2 or other wireless power architectures, synchronous rectification, soft-switching or GaN power stages, capacitive power transfer, RF energy harvesting, or custom contactless power links. Experience with IEEE 802.15.4/802.15.4z UWB hardware, two-way ranging, TDoA, secure-ranging integration, or multi-antenna angle-of-arrival systems. Experience with cellular MIMO, carrier aggregation, antenna tuning, RF front-end control, modem vendor diagnostics, or mmWave module integration. Experience with conducted/OTA testing, TRP/TIS measurements, cellular call boxes, Wi-Fi test platforms, and Wi-Fi/Bluetooth/cellular/UWB coexistence analysis. Experience with embedded C/C++, hardware drivers, SPICE/circuit simulation, or interpreting EM simulation results to improve coils, interconnects, and antenna interfaces. Experience supporting EMC/ESD and wireless certification testing, charging interoperability, design-for-test, manufacturing transfer, and environmental/reliability validation. US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit www.ustechsolutions.com. US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. AI Statement: By applying, you acknowledge that AI-assisted tools may be used during hiring. #LI-AS140

Electrical Engineer IV at US Tech Solutions, Inc. | Referso Jobs