Back to search

Embedded Engineer – Humanoid Joint & Motor Control

Develop embedded firmware and software for humanoid robot joints and motors. The role covers embedded component selection, real-time motor and joint control, sensor and communication integration, actuator bring-up, debugging and validation.

  • Hyderabad, Telangana, India
  • Posted Nov 11, 2026
INDUSTRYHardware & ElectronicsSemiconductorsEmbedded SystemsRobotics & Automation

Responsibilities

  • Define the embedded architecture for humanoid joints and actuators
  • Identify suitable MCU/MPU, motor driver, sensors and communication interfaces
  • Develop firmware for BLDC/PMSM motor control and Field-Oriented Control (FOC)
  • Implement position, velocity, torque and current control
  • Develop joint-control, calibration and actuator-management functions
  • Integrate encoders and position, current, torque and temperature sensors
  • Develop drivers for PWM, ADC, timers, DMA, SPI, I²C, UART and CAN/CAN FD
  • Connect the joint controller to the robot/motion controller using CAN FD, EtherCAT or Ethernet
  • Implement diagnostics, fault handling, watchdog and protection mechanisms
  • Support board, motor and actuator bring-up, tuning, debugging and validation
  • Collaborate with robotics, electronics, mechanical and control teams

Requirements

  • Bachelor’s/Master’s in Electronics, Electrical, Embedded Systems, Mechatronics, Robotics, Control Systems, Computer Engineering, or equivalent
  • Experience in a Humanoid Robotics
  • Experience in a Embedded systems
  • Experience in a Motor control

Nice to have: Robotics, Humanoid robots, Servo drives, Motor control, Industrial automation, Renesas MCUs, STM32, TI C2000, NXP MCUs, Infineon MCUs, FreeRTOS, ROS 2, Micro ROS, Motor drivers, Inverters, Power electronics

Skills

Embedded C/C++MCU firmware developmentBare-metal systemsRTOS-based systemsBLDC/PMSM motor controlField-Oriented Control (FOC)Position controlVelocity controlTorque controlPWMADCTimersDMAEncoder interfacesCAN/CAN FDEthernetSPII²CUARTSensor integrationHardware/software debuggingCAN FDEtherCATEthernet

Full description

Job Requirements Role Summary Develop embedded firmware and software for humanoid robot joints and motors. The role covers embedded component selection, real-time motor and joint control, sensor and communication integration, actuator bring-up, debugging and validation. Key Responsibilities Define the embedded architecture for humanoid joints and actuators. Identify suitable MCU/MPU, motor driver, sensors and communication interfaces. Develop firmware for BLDC/PMSM motor control and Field-Oriented Control (FOC). Implement position, velocity, torque and current control. Develop joint-control, calibration and actuator-management functions. Integrate encoders and position, current, torque and temperature sensors. Develop drivers for PWM, ADC, timers, DMA, SPI, I²C, UART and CAN/CAN FD. Connect the joint controller to the robot/motion controller using CAN FD, EtherCAT or Ethernet. Implement diagnostics, fault handling, watchdog and protection mechanisms. Support board, motor and actuator bring-up, tuning, debugging and validation. Collaborate with robotics, electronics, mechanical and control teams. Work Experience • Required Skills Strong Embedded C/C++ and MCU firmware development. Experience with bare-metal and/or RTOS-based systems. Knowledge of BLDC/PMSM motor control and FOC. Understanding of position, velocity, torque and current control. Experience with PWM, ADC, timers, DMA and encoder interfaces. Experience with CAN/CAN FD, Ethernet, SPI, I²C or UART. Experience integrating encoders and motor/joint sensors. Strong hardware/software debugging and system bring-up skills. Preferred Skills Robotics, humanoid robots, servo drives, motor control or industrial automation. Renesas, STM32, TI C2000, NXP or Infineon MCUs. FreeRTOS or similar RTOS. ROS 2 / Micro ROS exposure. Motor drivers, inverters and power electronics. Qualification & Experience Bachelor’s/Master’s in Electronics, Electrical, Embedded Systems, Mechatronics, Robotics, Control Systems, Computer Engineering, or equivalent. Hands-on experience in embedded systems, motor control, robotics or motion control. Core Keywords Humanoid Robotics • Embedded C/C++ • MCU • RTOS • Joint Control • Motor Control • Position Control • Velocity Control • Torque Control • PWM • ADC • Encoder • CAN FD • Sensors • Actuator • Firmware • Diagnostics • Bring-up

Embedded Engineer – Humanoid Joint & Motor Control at Quest Global | Referso Jobs