Back to search

Exterior Mechanisms Engineer

You will own the mechanisms that customers touch every day: hoods, liftgates, doors, fuel and charge port doors, running boards, tonneau systems, and the exterior accessories that attach to them. This is a clean sheet program, not a carryover, which means you will define kinematics, effort targets, and hardware architecture rather than inherit them. You will personally build and drive the CAD, run the studies that prove the motion works, and stay with the component through DV, PV, and launch.

  • Palo Alto, California, United States +1 more
  • Full-time
  • On-site
  • $115K–$126K per year
  • Posted Nov 12, 2026
INDUSTRYEngineeringMechanical Engineering

Locations (2)

  • Palo Alto, California, United States
  • Long Beach, California, United States

Responsibilities

  • Own exterior mechanism components end to end, from concept and packaging through design, validation, and production launch.
  • Design and release hinges, latches, strikers, check links, gas struts and spindle drives, actuators, cables, and linkage systems, working to opening and closing effort targets, cycle life, and load cases.
  • Build and maintain your own CAD in 3DX and CATIA.
  • Develop kinematic studies, motion envelopes, swing paths, tolerance stacks, and clearance to surrounding structure, sheet metal, and trim.
  • Define and drive DFMEA, DVP&R, and test plans.
  • Apply design for manufacturing across injection molded, sheet metal, and stamped components, including draft, gate and parting line strategy, tooling feasibility, and forming and weld constraints.
  • Source and manage suppliers through the full development cycle: technical reviews, design gates, tooling kickoff, PPAP support, and issue resolution.
  • Support prototype and pilot builds hands on.
  • Coordinate with Studio, Body, Closures, Interiors, Electrical, and Manufacturing to hold design intent while resolving competing requirements.
  • Manage part release, change actions, and BOM accuracy through the program's PLM and change control process.

Requirements

  • Bachelor's degree in Mechanical Engineering or a related discipline.
  • Experience in a automotive
  • Experience in a product development

Nice to have: clean sheet program experience, closures, exterior trim, or accessories commodity background, Kinematic simulation, motion analysis, CAE experience

Skills

CATIA/3DXGD&TDFMEADVP&Rtolerance stack analysissupplier managementhingeslatchesstrikersactuatorslinkage systemssheet metal designinjection molding designCATIA3DX

Benefits

  • work-life balance
  • professional growth
  • collaborative culture

More jobs nearby

Full description

Join a Global Leader in Workforce Solutions – Net2Source Inc. Who We Are: Net2Source Inc. isn't just another staffing company, we're a powerhouse of innovation, connecting top talent with the right opportunities. Recognized for 300% growth in the past three years, we operate in 32 countries with a global team of 5,500+. Our mission? To bridge the talent gap with precision—Right Talent. Right Time. Right Place. Right Price. Title: Exterior Mechanisms Engineer Location: Palo Alto, CA Type: Direct hire Base salary range: $115,000 to $126,000 (maximum base salary) Must have: Engineer (Proven track record owning door, hood, liftgate, tailgate, or charge port systems from concept through production launch. Strong hands-on expertise in CATIA/3DX, GD&T, DFMEA, DVP&R, tolerance stack analysis, and supplier management. Experienced with hinges, latches, strikers, actuators, and linkage systems, with a solid understanding of sheet metal and injection molding design.) Role Summary You will own the mechanisms that customers touch every day: hoods, liftgates, doors, fuel and charge port doors, running boards, tonneau systems, and the exterior accessories that attach to them. This is a clean sheet program, not a carryover, which means you will define kinematics, effort targets, and hardware architecture rather than inherit them. You will personally build and drive the CAD, run the studies that prove the motion works, and stay with the component through DV, PV, and launch. The team is small and flat, so the engineer who owns the design also owns the supplier, the build issues, and the fix. Key Responsibilities Own exterior mechanism components end to end, from concept and packaging through design, validation, and production launch. Design and release hinges, latches, strikers, check links, gas struts and spindle drives, actuators, cables, and linkage systems, working to opening and closing effort targets, cycle life, and load cases. Build and maintain your own CAD in 3DX and CATIA. Develop kinematic studies, motion envelopes, swing paths, tolerance stacks, and clearance to surrounding structure, sheet metal, and trim. Define and drive DFMEA, DVP&R, and test plans. Work with test and validation teams to close open items and document compliance evidence. Apply design for manufacturing across injection molded, sheet metal, and stamped components, including draft, gate and parting line strategy, tooling feasibility, and forming and weld constraints. Source and manage suppliers through the full development cycle: technical reviews, design gates, tooling kickoff, PPAP support, and issue resolution. Support prototype and pilot builds hands on. Be at the vehicle, find the root cause, and drive the change through release. Coordinate with Studio, Body, Closures, Interiors, Electrical, and Manufacturing to hold design intent while resolving competing requirements. Manage part release, change actions, and BOM accuracy through the program's PLM and change control process. Required Qualifications Bachelor's degree in Mechanical Engineering or a related discipline. 5+ years of automotive or comparable product development experience owning mechanical components through launch. Direct design and release experience on mechanisms, linkages, hinges, latches, struts, or similar motion hardware. Demonstrated hands-on CAD ownership: you built the geometry yourself and can walk through the decisions in it. Working knowledge of injection molding and sheet metal manufacturing processes and their design constraints. Experience with GD&T, tolerance stack analysis, DFMEA, and DVP&R. Supplier-facing experience through tooling, build, and launch. Ability to work onsite in Long Beach. Preferred Qualifications Experience on a clean sheet or startup vehicle program where the process was still being defined. Closures, exterior trim, or accessories commodity background. 3DX and CATIA V6 proficiency. Kinematic simulation, motion analysis, or CAE experience beyond basic modeling. Vehicle launch experience at a plant, including build support, issue tracking, and containment. Exposure to power closure systems, sensors, or ADAS component integration into exterior surfaces. Why Work With Us? We believe in more than just jobs—we build careers. At Net2Source, we champion leadership at all levels, celebrate diverse perspectives, and empower you to make an impact. Think work-life balance, professional growth, and a collaborative culture where your ideas matter. Our Commitment to Inclusion & Equity Net2Source is an equal opportunity employer, dedicated to fostering a workplace where diverse talents and perspectives are valued. We make all employment decisions based on merit, ensuring a culture of respect, fairness, and opportunity for all, regardless of age, gender, ethnicity, disability, or other protected characteristics. Awards & Recognition · America's Most Honored Businesses (Top 10%) · Fastest-Growing Staffing Firm by Staffing Industry Analysts · INC 5000 List for Eight Consecutive Years · Top 100 by Dallas Business Journal · Spirit of Alliance Award by Agile1 a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }

Exterior Mechanisms Engineer at Net2Source | Referso Jobs