Plate, paint, heat treat, inspect and operate abrasive equipment to manufacture parts following established methods and procedures to maintain flow of work under prevalent material handling system while practicing and complying with environmental, health and safety directions and procedures.
Compensation
The salary range for this role $36.46 - $45.80 per hour
Responsibilities
Prepare parts for plating
Operate plating line equipment
Prepare and paint parts
Operate vapor, sand or dry blasting machines to prepare parts for production
Operate ovens, furnaces and induction machines to heat treat parts
Lead the Non-Destructive Testing team across manufacturing operations, owning throughput, schedule adherence, and the technical integrity of every inspection that supports aircraft flight hardware.
Compensation
The target base pay for this position is $95,600 - $195,000 per year. The compensation package will be determined by job-related knowledge, skills, and experience.
Responsibilities
Own daily NDT operations, including inspection queue management, technician assignments, shift coverage, and priorities
Supervise, mentor, and develop NDT technicians
Track queue aging, turnaround time, and demand against capacity
Ensure all NDT is performed per approved procedures, written practice, customer and engineering requirements, and applicable standards
Ensure timely, accurate transactions and record-keeping in FMDS and other systems of record
Requirements
Bachelor’s degree
Associate’s degree
High School Diploma/GED
Nice to have: NDT Level III certification
Nice to have: Composite inspection (phased array UT, through-transmission UT, bond testing, thermography)
As a Production Supervisor, you will lead and scale high-performance teams responsible for the production of Composite Overwrapped Pressure Vessel (COPV) assemblies — from assembly, welding, inspection, and delivery to final integration — inclusive of all piece parts and final machining.
Compensation
Pay Range:
$115,000.00 - $155,000.00
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.
Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Responsibilities
Ensure a strong focus is placed on safety, and maintain an excellent safety record
Manage technician training and development paths to boost quality and reduce lead time/cost
Define and enforce excellence in operational standards with strict accountability on production goals and all administrative tasks associated with achieving production targets and running teams
Hire, lead, and mentor a team of leads, technicians, welders, inspectors, and machinists to perform assembly, welding, curing, machining, proofing, coating and non-destructive testing/inspection operations
Drive continuous improvement in manufacturing processes, procedures, quality, and rate, including large scaling for high-volume production
Requirements
Bachelor’s degree
Nice to have: Composite material assembly
Nice to have: Building out a multidisciplinary production organization
Quality Assembly Mechanic - Nondestructive Test (NDT) Technician
Support the Quality Non-Destructive Testing (NDT) team by conducting NDT on aerospace products using cutting edge methods like Penetrant (PT) and working with digital and automated inspection systems.
Compensation
Summary pay range: $24.00/hourly – $51.27/hourly
Responsibilities
Performs setup for specialized non-destructive test or measurement equipment
Develops procedures and processes
Performs tests or inspections and collects data
Documents, analyzes and communicates results and assists with corrective action recommendations
Provides feedback on adverse trends
Requirements
High school diploma or equivalent
Nice to have: Level II Certification
Nice to have: Magnetic Particle
Nice to have: Fluorescent Dye Penetrant Nondestructive Testing
The HQ Global Process Engineering Authority (GPEA) establishes the enterprise-wide baseline for structural reliability and material validation across GE Vernova's manufacturing facilities, ensuring high-integrity criteria for special processes like Joining, Finishing, Heat Treat, and NDT technologies.
Compensation
For candidates applying to a U.S. based position, the pay range for this position is between $144,000.00 and $240,000.00.
Responsibilities
Synthesize, author, and govern the 1P1P standards for all Special Process subclasses
Define technical standards for the alignment of bonding processes and protective treatments with validation methods
Evaluate successful business-level innovations and codify them into Locked Configurations for enterprise-wide deployment
Establish and enforce equipment capability standards for new assets across +130 facilities
Architect the enterprise strategy for transitioning from manual inspection to automated, data-driven NDT and Metlab processes
Requirements
Bachelor’s Degree in Materials Science
Bachelor’s Degree in Metallurgical Engineering
Bachelor’s Degree in Chemical Engineering
Nice to have: ASNT Level III NDT certification
Nice to have: AWS Certified Welding Inspector (CWI) credentials
The Quality Engineer supports operations through application of quality engineering skills and industry based product knowledge, focusing on elastomer and PTFE diaphragms.
Compensation
Equal Pay Act Range
$64,900.00 to $96,900.00, plus benefits and potential bonus
Responsibilities
Implement and drive changes that strengthen ITT’s quality assurance program with focus on the diaphragm product line
Contribute information for material review meetings with process improvement deliverables
Review or disposition of non-conformances and returned material evaluation process for site
Performs detailed inspection and analysis of sample components regarding dimensional conformance to drawings and non-destructive testing
Develops and initiates standards and methods for inspection, testing, and evaluation of product
Requirements
Bachelor's degree
Nice to have: Experience working within a regulated industry in a Quality Assurance function
Lead and manage a regional QA/QC team across multiple construction and fabrication sites, ensuring compliance with ASME codes and company SOPs.
Compensation
$59.27 to $74.09 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others.
Responsibilities
Provide multi-site leadership to the regional QA/QC team
Direct the execution of the Project Specific Quality Control Plan across multiple projects
Support Project Leads, Project Managers, and QA/QC leadership with inspection planning, field verification, and quality documentation
Strategize and implement "First-in Inspection" processes across the region
Audit and review design documentation, vendor quality manuals, and company records for regional compliance with ASME B31 and Section IX codes
Requirements
Associate degree (A.A.) or technical school equivalent
Nice to have: Senior Certified Welding Inspector (SCWI)
Nice to have: Certified Welding Inspector (CWI) per AWS QC-1
Nice to have: ICC Mechanical – Commercial Certification
Support the Integrated Mining Technical Training (IMTT) Unit at VETA Moshi, helping strengthen technical training for Tanzania's growing mining, manufacturing, construction, and fabrication industries through hands-on coaching and mentorship.
Compensation
Monthly living allowance, Accommodation, Health insurance (including required vaccinations and antimalarial medication), Round-trip airfare and visa/work permit costs, Pre-placement, in-country and reintegration training (along with access to self-directed materials and online resources), Ongoing local support, Access to the Employee Assistance Program during and after placement
Responsibilities
Conduct training needs assessments in welding, fabrication, cutting, inspection, and quality control
Strengthen practical instruction in heavy plate welding
Develop and enhance training modules for SMAW, GMAW/MIG, FCAW, and GTAW
Strengthen practical training in thermal cutting technologies like Plasma Arc Cutting (PAC)
Build instructor capacity in Welding Procedure Specifications (WPS)
Requirements
Bachelor's Degree (or equivalent qualification) in Mechanical Engineering, Welding Engineering, Manufacturing/Fabrication Engineering, Metallurgical Engineering, or a related technical field