Assemble mechanical assemblies, subassemblies, and top assemblies of simple to complex product line that includes but is not limited to military parts for customers such as Boeing Defense, Lockheed Martin, Sikorsky and Goodrich.
Compensation
The hourly rate for this position is $27.95 plus $2 shift differential per hour.
Responsibilities
Assembly of mechanical assemblies, subassemblies, and top assemblies
Perform lock wire/safety wire and nameplate
Proactively identifies best practices
Utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, depth micrometers, calipers, lockwire pliers and dial indicators
Proficiently interpret blueprints, verbal, and/or written instructions
Requirements
High School diploma, GED or equivalent from an accredited institution
The QA/QC Inspector I performs visual inspection and verification of material, equipment, piping systems, welding, and brazing installation work on assigned projects and in fabrication shops.
Compensation
Competitive Wages: $33.31 to $43.10 per hour.
Responsibilities
Perform visual examination of welded, brazed, soldered, and mechanical joints
Inspect pipe fit-up, alignment, joint preparation, cleanliness, support and hanger installation, and general workmanship
Perform receiving inspection of material and equipment against the submittal, packing list, and required documentation
Perform in-process and final visual inspection of high-purity process piping, clean utilities, chemical and gas systems, hydronic systems, and HVAC mechanical systems
Attend hold and witness points as scheduled, and participate in pressure tests, system walkdowns, punch-list inspections, and pre-turnover verification
Requirements
Current ASNT or ACCP VT Level I or Level II certification
The final Inspection position performs a full inspection of parts as outlined in work instructions or customer specifications. This job is a certified Position that will perform all work cell operations.
Compensation
New Hire Starting Hourly Rate: $25.00; After 12 Months: $27.71
Responsibilities
Perform a full inspection of parts as outlined in work instructions or customer specifications
Maintain UT Ultra Sonic Reading per customer requirements
Highlight problem indications to supervision for consideration
Maintain own production count and/or other records
Has nonconforming product disposition authority within the scope of this job description
Requirements
High School diploma or GED from an accredited institution
The final Inspection position performs a full inspection of parts as outlined in work instructions or customer specifications. This job is a certified Position that will perform all work cell operations.
Compensation
New Hire Starting Hourly Rate: $25.00; After 12 Months: $27.71
Responsibilities
Perform a full inspection of parts as outlined in work instructions or customer specifications
Maintain UT Ultra Sonic Reading per customer requirements
Highlight problem indications to supervision for consideration
Maintain own production count and/or other records
Has nonconforming product disposition authority within the scope of this job description
Requirements
High School diploma or GED from an accredited institution
The final Inspection position performs a full inspection of parts as outlined in work instructions or customer specifications. Must maintain UT Ultra Sonic Reading per customer requirements. This job is a certified Position that will perform all work cell operations.
Compensation
New Hire Starting Hourly Rate: $25.00; After 12 Months: $27.71
Responsibilities
Highlights problem indications to supervision for consideration
Maintains own production count and/or other records as might be required
Has nonconforming product disposition authority within the scope of this job description
The QA/QC Inspector I performs visual inspection and verification of material, equipment, piping systems, welding, and brazing installation work on assigned projects and in fabrication shops, ensuring compliance with project specifications and ASME piping codes.
Compensation
Competitive Wages: $36.47 to $47.19 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation.
Responsibilities
Perform visual examination of welded, brazed, soldered, and mechanical joints
Inspect pipe fit-up, alignment, joint preparation, cleanliness, support and hanger installation
Perform receiving inspection of material and equipment against submittal and documentation
Perform in-process and final visual inspection of high-purity process piping, clean utilities, chemical and gas systems, hydronic systems, and HVAC mechanical systems
Attend hold and witness points and participate in pressure tests and punch-list inspections
Requirements
Current ASNT or ACCP VT Level I or Level II certification
The QA/QC Inspector I performs visual inspection and verification of material, equipment, piping systems, welding, and brazing installation work on assigned projects and in fabrication shops.
Compensation
Competitive Wages: $33.31 to $43.10 per hour.
Responsibilities
Perform visual examination of welded, brazed, soldered, and mechanical joints
Inspect pipe fit-up, alignment, joint preparation, cleanliness, support and hanger installation
Perform receiving inspection of material and equipment against the submittal, packing list, and required documentation
Perform in-process and final visual inspection of high-purity process piping, clean utilities, chemical and gas systems, hydronic systems, and HVAC mechanical systems
Attend hold and witness points as scheduled, and participate in pressure tests, system walkdowns, punch-list inspections, and pre-turnover verification
Requirements
Current ASNT or ACCP VT Level I or Level II certification
Quality Engineering Technician is responsible for supporting development and release to production of new additive manufactured products. This role will work closely with engineering, providing input on inspection methods, leading execution of test method validations, and ensuring all methods are scalable at production levels.
Compensation
Level 3: $28.29 - $38.90
Level 4: $40.00 - $42.61
Responsibilities
Verify that materials, equipment, processes, and products comply with quality specifications
Support development and validate inspection and test methods
Monitor, and provide data for reporting on product quality metrics
Support compliance with customer, internal, industry (AS9100, ISO 9001, ISO 13485), and regulatory requirements through audits and gap analysis
Assist in developing and implementing process controls, corrective actions, and continuous improvement initiatives
Quality Engineering Technician is responsible for supporting development and release to production of new additive manufactured products. This role will work closely with engineering, providing input on inspection methods, leading execution of test method validations, and ensuring all methods are scalable at production levels.
Compensation
Level 3: $28.29 - $38.90
Level 4: $40.00 - $42.61
Responsibilities
Verify that materials, equipment, processes, and products comply with quality specifications
Support development and validate inspection and test methods
Monitor, and provide data for reporting on product quality metrics
Support compliance with customer, internal, industry (AS9100, ISO 9001, ISO 13485), and regulatory requirements through audits and gap analysis
Assist in developing and implementing process controls, corrective actions, and continuous improvement initiatives
The Formulation Technician I plays a critical role in supporting manufacturing operations by following established procedures and quality standards to ensure the consistent production of high-quality products.