Responsible for preparing single line diagrams, panel layouts, schematics, BOMs, and related documentation for medium/high voltage substations, while addressing technical queries and collaborating with cross‑functional teams.
Responsibilities
Preparation of Single Line Diagram/Protection Single Line Diagram
Preparation of Panel Layout and BOM
Preparation of Protection and Control Panel schematics for Medium/High Voltage Substation
Preparation of Junction Box for CT, VT, and Density monitors, AC / DC Load calculation
Seeking experienced Relay Testing Professionals at the Level III, Senior, and Lead levels passionate about power system protection, technical excellence, and mentoring the next generation of field technicians & engineers. This role is responsible for the commissioning and testing of protection & control schemes and systems for customers’ electric utility substation and plant location.
Compensation
The compensation range for this position is provided in accordance with applicable laws and market practices.
Responsibilities
Red-lines design documents throughout the drawing set (Single Line, AC/DC Elementary, Wiring, Panel Arrangement, and Bill of Material/Material List)
Performs End-To-End testing
Performs IED testing, both manually and with operating automated test sets (such as the Doble 6150, Omicron, Manta) for protection & control schemes
Identifies common risks associated with testing and commissioning those schemes and systems
Develops test plans, risk assessments, and practical application of basic protection & control systems and schemes
Requirements
Associate degree holders and candidates with equivalent technical training
Bachelor's degree holders in Electrical Engineering or related field from an accredited program
Seeking experienced Relay Testing Professionals at the Level III, Senior, and Lead levels passionate about power system protection, technical excellence, and mentoring the next generation of field technicians & engineers. This role is responsible for the commissioning and testing of protection & control schemes and systems for customers’ electric utility substation and plant location.
Compensation
The compensation range for this position is provided in accordance with applicable laws and market practices.
Responsibilities
Red-lines design documents throughout the drawing set (Single Line, AC/DC Elementary, Wiring, Panel Arrangement, and Bill of Material/Material List)
Performs End-To-End testing
Performs IED testing, both manually and with operating automated test sets (such as the Doble 6150, Omicron, Manta) for protection & control schemes
Identifies common risks associated with testing and commissioning those schemes and systems
Develops test plans, risk assessments, and practical application of basic protection & control systems and schemes
Requirements
Associate degree holders and candidates with equivalent technical training
Bachelor's degree holders in Electrical Engineering or related field from an accredited program
Seeking experienced Relay Testing Professionals at the Level III, Senior, and Lead levels passionate about power system protection, technical excellence, and mentoring the next generation of field technicians & engineers. This role is responsible for the commissioning and testing of protection & control schemes and systems for customers’ electric utility substation and plant location.
Compensation
The compensation range for this position is provided in accordance with applicable laws and market practices.
Responsibilities
Red-lines design documents throughout the drawing set (Single Line, AC/DC Elementary, Wiring, Panel Arrangement, and Bill of Material/Material List)
Performs End-To-End testing
Performs IED testing, both manually and with operating automated test sets (such as the Doble 6150, Omicron, Manta) for protection & control schemes
Identifies common risks associated with testing and commissioning those schemes and systems
Develops test plans, risk assessments, and practical application of basic protection & control systems and schemes
Requirements
Associate degree holders and candidates with equivalent technical training
Bachelor's degree holders in Electrical Engineering or related field from an accredited program
Responsible for the commissioning and testing of protection & control schemes and systems for customers’ electric utility substation and plant location, including but not limited to the range of Intelligent Electronic Devices (IED).
Compensation
The compensation range for this position is provided in accordance with applicable laws and market practices.
Responsibilities
Red-lines design documents throughout the drawing set (Single Line, AC/DC Elementary, Wiring, Panel Arrangement, and Bill of Material/Material List)
Performs End-To-End testing
Performs IED testing, both manually and with operating automated test sets (such as the Doble 6150, Omicron, Manta) for protection & control schemes
Identifies common risks associated with testing and commissioning those schemes and systems
Develops test plans, risk assessments, and practical application of basic protection & control systems and schemes
Requirements
Associate degree holders and candidates with equivalent technical training
Bachelor's degree holders in Electrical Engineering or related field from an accredited program
Responsible for the commissioning and testing of protection & control schemes and systems for customers’ electric utility substation and plant location, including but not limited to the range of Intelligent Electronic Devices (IED).
Compensation
The compensation range for this position is provided in accordance with applicable laws and market practices. The final base salary offered may vary based on factors including, but not limited to, education, qualifications, certifications, experience, skills, seniority, geographic location, internal equity, performance, and business needs.
Responsibilities
Red-lines design documents throughout the drawing set (Single Line, AC/DC Elementary, Wiring, Panel Arrangement, and Bill of Material/Material List)
Performs End-To-End testing
Performs IED testing, both manually and with operating automated test sets (such as the Doble 6150, Omicron, Manta) for protection & control schemes
Identifies common risks associated with testing and commissioning those schemes and systems
Develops test plans, risk assessments, and practical application of basic protection & control systems and schemes
Requirements
Associate degree holders and candidates with equivalent technical training
Bachelor's degree holders in Electrical Engineering or related field from an accredited program
The Substation Project Engineer provides the technical backbone for substation projects managed on behalf of a utility customer.
Responsibilities
Define technical scope for P&C and apparatus work and develop the technical sections of engineering and construction RFPs.
Provide technical evaluation of engineering and construction proposals to support the Project Manager's award recommendations.
Review design packages, one-line and three-line diagrams, schematics, and wiring diagrams for constructability and conformance to customer standards.
Serve as the subject matter expert in identifying and specifying the materials and prints required to execute P&C and apparatus scope, and track customer-procured material against the schedule.
Plan and coordinate outages using knowledge of one-line and three-line diagrams and zones of protection, working within the customer's outage process and software.
Requirements
Bachelor's Degree in Electrical Engineering or a related field
Nice to have: EIT or PE license
Nice to have: Senior or Lead Protection and Control Technician experience
The Substation Construction Manager (CM) position is intended for individuals with extensive experience managing the construction of transmission and distribution substations from site preparation through final inspection.
Responsibilities
Manage substation construction projects
Act as the liaison between the customer and the construction contractor
Lead construction meetings with the customer, contractor, and engineering firm
Prepare weekly project reports
Be present on site for critical construction steps
Requirements
Bachelor's Degree in Electrical Engineering
Nice to have: Substation Journeyman
Nice to have: Journeyman Lineman
Nice to have: Construction supervisor in a leadership role
Responsible for commissioning and testing of protection & control schemes and systems for customers’ electric utility substation and plant locations, including IEDs, SCADA, RTU, DFR, and IEC-61850 devices.
Responsibilities
Red-lines design documents throughout the drawing set (Single Line, AC/DC Elementary, Wiring, Panel Arrangement, and Bill of Material/Material List)
Performs End-To-End testing
Performs IED testing, both manually and with operating automated test sets (such as the Doble 6150, Omicron, Manta) for protection & control schemes
Identifies common risks associated with testing and commissioning those schemes and systems
Develops test plans, risk assessments, and practical application of basic protection & control systems and schemes
Requirements
Associate degree holders and candidates with equivalent technical training
Bachelor's degree holders in Electrical Engineering or related field from an accredited program
P&C Testing ProfessionalQualus · Remote, US
Substation Project Engineer, Protection & ApparatusTelex LLC · US