Join our next-generation Sunshine Sputter Platform as a Senior Vacuum Coating Equipment Design Engineer. You will lead the mechanical design and industrialization of advanced PVD magnetron sputtering and CVD deposition equipment, taking products from concept and prototype through production release and factory deployment in Shenzhen and Penang. Working closely with process, automation, manufacturing, and supplier teams, you will play a key role in delivering high-performance vacuum coating systems for volume manufacturing.
Locations (2)
Shenzhen, Guangdong, China
Penang, Indonesia
Responsibilities
Lead the mechanical design of vacuum chambers, pumping systems, target assemblies, wafer/disk handling mechanisms, and thermal management modules using Creo/Pro-E
Perform structural, thermal, vacuum stress, and CFD simulations using Ansys to optimize chamber performance, vacuum integrity, pumping efficiency, and coating uniformity
Drive prototype development from fabrication through supplier assembly, system integration, equipment qualification, and production commissioning
Investigate and resolve mechanical issues including vacuum leaks, thermal deformation, motion reliability, interference, and cable routing
Develop DOE validation plans, engineering reports, 8D corrective actions, and engineering change documentation
Requirements
Master's degree or above in Mechanical Engineering, Vacuum Engineering, Precision Manufacturing, or a related discipline
Nice to have: HDD carbon overcoat sputtering equipment experience
Contribute to the development of a next generation loitering munition system for the U.S. Army, supporting development, integration, and verification of complex defense systems.
Responsibilities
Support the development, documentation and management of system and subsystem requirements
Assist with translating customer and stakeholder needs into clear, measurable and verifiable engineering requirements
Maintain requirements traceability
Develop and maintain systems engineering documentation
Support system architecture development and interface definition
Lead a team of 3–4 planners and own integrated production planning across Zipline’s aircraft manufacturing—from NPI and validation builds through ramp and scaled production.
Compensation
The starting cash range for this role is $180,000 - $250,200.
Responsibilities
Lead and develop 3–4 production planners, setting priorities, coaching the team, and supporting clear ownership
Own integrated build plans across NPI, validation, ramp, and scaled production, translating business priorities into achievable schedules
Connect final assembly with feeder lines, materials, labor, tooling, test, and quality capacity; identify constraints before they disrupt production
Partner with Production and Supply Chain on clear-to-build readiness, shortages, inventory and work in process, and recovery plans
Coordinate engineering changes, configuration cutovers, rework, and material transitions to protect schedule and traceability
Drive and support the SAP-based engineering and document management landscape by combining deep technical expertise with business process understanding to design, optimize, and continuously enhance SAP PLM, SAP DMS, and engineering collaboration solutions in a global environment.
Responsibilities
Provide technical consultancy and solution design in the areas of SAP Product Lifecycle Management (PLM), Document Management System (DMS), and Engineering Collaboration solutions.
Configure, customize, and support SAP PLM/DMS solutions and related add-ons, including content repositories, and engineering collaboration platforms.
Design and optimize document management processes, workflows, approval procedures, digital signature integration, search functionality, and document classification concepts.
Analyze and resolve technical issues related to file conversion, document rendering, and integration solutions (e.g., SEAL Systems, CIDEON Conversion Engine).
Monitor and support critical system interfaces and background processing, including update tasks, integration monitoring, IDoc processing, and document distribution processes.
Requirements
Nice to have: ProNovia / ProPLM Client configuration
Nice to have: SAP Integrated Product Development (IPD) Collaboration
Turn boost and fuel-delivery designs into production-ready engine systems.
Responsibilities
Lead supercharger development and production release, coordinating thermal performance, drive-system loads, lubrication, noise, and durability reviews.
Develop and release port fuel injection (PFI) and direct injection (DI) injectors and fuel rails, coordinating cylinder-head, electrical, controls, calibration, and pressure-sensor interfaces.
Address fuel safety, combustion and emissions impacts, manufacturing variation, and end-of-line test requirements.
Coordinate fuel-rail installation, packaging, and assembly interfaces with vehicle integration teams.
Guide CAD models and engineering drawings; coordinate CAE, calculations, and simulation-to-test correlation.
Requirements
Bachelor’s degree in Mechanical Engineering
Bachelor’s degree in Automotive Engineering
Nice to have: Automotive component development experience
The PLM Analyst supports Product Lifecycle Management and Configuration Management activities within a hardware and manufacturing environment. This role is responsible for maintaining accurate product data, managing Bills of Materials (BOMs), coordinating engineering changes, and ensuring product documentation is properly controlled throughout the product lifecycle.
Compensation
The hourly rate for this position is between $23.00-$25.00 per hour, depending on experience and other qualifications of the successful candidate.
Bonus Eligibility: performance
Responsibilities
Create and process Bills of Materials (BOMs), Engineering Change Requests and Orders (ECR/ECN/ECO), Manufacturer Change Orders (MCOs), Deviations, and other Configuration Management activities using PTC Windchill PLM.
Research product change impact and identify affected products, assemblies, components, and documentation before changes are finalized.
Review incoming Change Orders to ensure compliance with established standards, workflows, and business requirements.
Maintain BOM information and associated product documentation, including AML/AVL data, Manufacturer Part Numbers (MPNs), specifications, RoHS certificates, and supporting documentation.
Perform high-level BOM reviews to identify documentation requirements across assemblies and subassemblies.
Manufacturing Engineer responsible for supporting complex assemblies in a clean‑room manufacturing environment, managing BOM changes, ECRs, and continuous improvement initiatives.
Responsibilities
Manage bills of materials (BOM) changes and process Engineering Change Requests (ECRs).
Update engineering drawings, manufacturing procedures, and other technical documentation.
Perform fault finding and interpret electrical and mechanical schematics.
Investigate and implement product and process improvements.
Build a strong understanding of AXM build and test processes, identify opportunities to improve process flow, and address quality issues in partnership with the clean‑room team.
Requirements
HND or equivalent qualification in electrical, electronic, or mechanical engineering
Nice to have: Previous experience working in a clean‑room environment
The ECO Engineer is responsible for managing and coordinating Engineering Change Orders (ECOs) initiated by customers. This role serves as the key focal point between customers and internal cross-functional teams to ensure all engineering changes are reviewed, communicated, planned, and implemented accurately while meeting quality, cost, and delivery requirements.
Responsibilities
Receive and review Engineering Change (EC/ECO) notifications from customers through designated systems and platforms
Coordinate customer-driven changes related to Product design, Components and materials, Manufacturing processes, Equipment and tooling, Documentation and specifications
Analyze the impact of engineering changes on production, inventory, quality, procurement, and supply chain activities
Collaborate closely with cross-functional teams, including Engineering, Manufacturing, Quality, Supply Chain, Planning, Procurement, and Program Management, to ensure successful implementation of changes
Facilitate change review meetings and track progress to ensure all actions are completed according to schedule
Requirements
Bachelor's degree in Engineering, Electronics, Industrial Engineering, Manufacturing Engineering, or related fields
Nice to have: EMS (Electronics Manufacturing Services) environment experience
Nice to have: Familiarity with customer change management processes
Nice to have: Knowledge of BOM
Nice to have: Knowledge of manufacturing processes
Lead Manufacturing Process Engineer – AME & Testing
Lead manufacturing process engineering and quality initiatives for high‑precision medical imaging equipment, driving NPI, automation, and continuous improvement.
Responsibilities
Lead NPI activities and manufacturing transfers
Design, develop, implement, and optimize manufacturing processes and automation
Drive technical problem‑solving and root cause analysis
Collaborate with AME teams on Lean, digital transformation, and automation
Lead process qualification and validation
Requirements
Bachelor's degree in Mechanical, Production, Manufacturing, Mechatronics, Robotics and Automation, Electrical, or related engineering discipline