Highly autonomous, technically strong engineer to support the troubleshooting, commissioning and field performance of utility-scale central photovoltaic inverters and BESS (Battery Energy Storage System).
Responsibilities
Work safely at all times, strictly following applicable electrical-safety procedures, commissioning protocols, lock-out/tag-out requirements and site rules, while actively identifying and mitigating HSE risks during field and test-facility activities.
Lead and support commissioning, energization, functional testing, power ramp-up, grid-code verification and final performance validation of central inverters and BESS.
Diagnose complex electrical, electronic, control, firmware, communication and integration failures in the field and remotely.
Perform structured fault-finding using inverter logs, oscillography, SCADA trends, electrical measurements and inspection evidence.
Conduct component-level diagnostics of power-electronics systems, including IGBT/power modules, gate drivers, DC-link capacitors, auxiliary supplies, cooling systems, protections and communications hardware.
Requirements
Degree in Electrical, Electronic, Industrial or Power Engineering
Nice to have: Python-based test automation and data analysis
Assemble, wire, inspect, test, troubleshoot, and repair electrical systems and components used across NOV ISE product lines, providing technical support and coaching to production teams.
Responsibilities
Read and interpret electrical schematics, wiring diagrams, single-line diagrams, engineering drawings, bills of material, route cards, and technical specifications
Install and terminate cables, connectors, junction boxes, control panels, motors, sensors, switches, and associated electrical components
Use calibrated electrical test instruments and measuring equipment correctly
Verify completed work through visual inspection, continuity checks, functional testing, and other specified acceptance criteria
Identify electrical faults and technical issues, perform structured troubleshooting and root-cause analysis, and implement approved corrective actions
Requirements
Recognized electrical apprenticeship
Technical diploma
HNC
Higher diploma or degree in Electrical Engineering or a related discipline
Diagnose faults systematically in lighting, power, distribution, controls and associated electrical equipment, and carry out planned maintenance and repairs.
Responsibilities
Diagnose faults in lighting, power, distribution, controls and associated electrical equipment
Carry out planned maintenance, visual inspections, functional checks, and replacement of defective accessories
Work with emergency lighting systems to I.S. 3217 and fire detection and alarm systems to I.S. 3218
Interpret circuit diagrams, distribution schedules, maintenance histories and manufacturer instructions
Complete accurate job reports, asset records, photographs, material usage and recommendations on EMH mobile systems
Requirements
Relevant testing qualifications/competence
Nice to have: Experience across varied commercial premises
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. The technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (2)
Charleston, West Virginia, United States
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment
Complete daily job hazard analyses (JHAs)
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. Once in the field, the technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (4)
Kalamazoo, Michigan, United States
United States, United States
Canada, Canada
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites, from basic measurements to acceptance and maintenance testing.
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. The technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (4)
Fort Wayne, Indiana, United States
United States, United States
Canada, Canada
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. The technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (4)
Athens, Ohio, United States
United States, United States
Canada, Canada
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. The technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (2)
Atlanta, Georgia, United States
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment
Complete daily job hazard analyses (JHAs)
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program.
Locations (2)
Raleigh, North Carolina, United States
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules
Set up and operate relay test sets and other test equipment
Record test data and develop test procedures
Requirements
High school diploma or GED
Associate degree or a trade/technical school certificate or diploma (preferred)
Entry-level Field Service Technician in the POWERX National Technician Development Program, completing training and performing electrical field testing, commissioning, and service activities nationwide.
Locations (2)
Ashburn, Virginia, United States
Phoenix, Arizona, United States
Compensation
Virginia Pay Range (Hourly) $32—$32 USD
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
Execute assigned test points and procedures accurately, progressing to independent testing
Apply NFPA 70E requirements and site-specific safety rules, including PPE, lockout/tagout, and live-dead-live verification
Complete daily job hazard analyses and mitigate electrical hazards
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
Execute assigned test points and procedures accurately.
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment, including PPE, lockout/tagout (LOTO), and live-dead-live verification.
Complete daily job hazard analyses (JHAs).
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers.
Requirements
High school diploma or GED
Associate degree or a trade/technical school certificate or diploma (preferred)
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment
Complete daily job hazard analyses (JHAs)
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
Requirements
High school diploma or GED
Associate degree or a trade/technical school certificate or diploma (preferred)
Nice to have: NETA certification
Nice to have: Working knowledge of protective relay concepts
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment
Complete daily job hazard analyses (JHAs)
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
Requirements
High school diploma or GED
Associate degree or a trade/technical school certificate or diploma (preferred)