Own validation: a module, board section or small product, partnering with the Lead Validation Engineer from first power-on to mass production. Support test plan development and run in one or more areas such as power, high-speed IO, low-speed IO (I2C, SPI, UART, SMBus, GPIO), clocks/resets, BMC, sensors, telemetry and firmware.
Compensation
The expected base salary ranges for this position are: 108,000 USD – 184,000 USD for Level 2; and 136,000 USD – 212,750 USD for Level 3.
Responsibilities
Own validation: a module, board section or small product, partnering with the Lead Validation Engineer from first power-on to mass production
Support test plan development and run in one or more areas such as power, high-speed IO, low-speed IO (I2C, SPI, UART, SMBus, GPIO), clocks/resets, BMC, sensors, telemetry and firmware
Debug and root-cause board, firmware and system issues from bring-up through production, using measurements and first-principles analysis
Power validation: sequencing, load, transient and protection testing
High-speed interfaces: PCIe, Ethernet and USB, using high-bandwidth scopes, TDR and protocol analyzers
The Space Imaging team is seeking an Electrical Engineer to join the team. The Space Imaging team is responsible for all aspects of spaceborne EO/IR system development, from the ideation stage through initial production. In this role, you will work closely with an interdisciplinary technical team to define the electrical architecture of space-qualified EO/IR sensor payloads — including power distribution, connector/harness interfaces, EMI/EMC protection, and high-speed communication interfaces — build and test prototypes, and mature designs into flight hardware products. As needed, you will also lead small teams of engineers from concept through system definition and development.
Compensation
US Salary Range
$147,000—$196,000 USD
Responsibilities
Define and own the electrical architecture for EO/IR sensor payload assemblies, including power distribution, connector/harness interfaces, grounding/bonding schemes, and communication interfaces.
Design, analyze, and test isolated power conversion, EMI filtering, inrush current limiting, and over-voltage/reverse-polarity protection circuitry for low-voltage DC payload power systems.
Select connectors, define pin assignments, perform wire/cable and component derating analyses, and establish shielding, bonding, and isolation schemes to meet EMI/EMC requirements.
Design and support high-speed Ethernet (10GbE) and discrete I/O (RS-422, I2C, SPI) interfaces between sensor electronics and host avionics.
Support EMI/EMC qualification testing (MIL-STD-461/464), and ESD protection design.
Requirements
Bachelor's in Electrical Engineering or a related technical field
Own validation: a module, board section or small product, partnering with the Lead Validation Engineer from first power-on to mass production. Support test plan development and run in one or more areas such as power, high-speed IO, low-speed IO (I2C, SPI, UART, SMBus, GPIO), clocks/resets, BMC, sensors, telemetry and firmware.
Compensation
The expected base salary ranges for this position are: 108,000 USD – 184,000 USD for Level 2; and 136,000 USD – 212,750 USD for Level 3.
Responsibilities
Own validation of a module, board section or small product from first power-on to mass production
Support test plan development and run in power, high-speed IO, low-speed IO (I2C, SPI, UART, SMBus, GPIO), clocks/resets, BMC, sensors, telemetry and firmware
Debug and root-cause board, firmware and system issues from bring-up through production
Perform power validation including sequencing, load, transient and protection testing
Validate high-speed interfaces such as PCIe, Ethernet and USB using high-bandwidth scopes, TDR and protocol analyzers
We are looking for a Cyber-Physical Systems Reverse Engineer to support a new project researching and developing novel capabilities for maritime cybersecurity.
Compensation
Pay Range $107,900.00 - $195,050.00
Responsibilities
Develop, integrate, and debug embedded firmware for real-time and resource-constrained systems, including RTOS-based applications, device drivers, hardware interfaces, and low-level system software
Design and implement simulation, emulation, and automated test environments for embedded and cyber-physical systems, including tools for exploring system behavior, reproducing observed effects, and exercising hardware and firmware
Analyze and reverse engineer embedded devices, firmware, communications protocols, sensors, and other system components to understand both intended functionality and real-world behavior
Develop production-quality C/C++ and Python software to automate testing, instrumentation, experimentation, and analysis, including integration with laboratory hardware and software-based analysis tools
Conduct hands-on laboratory testing using embedded debugging tools and analog/digital instrumentation; critically analyze, document, and communicate technical findings
Requirements
Nice to have: Reverse engineering embedded devices and firmware using tools such as Ghidra, Binary Ninja, IDA Pro
Nice to have: Program analysis and vulnerability research techniques (fuzzing, symbolic execution, static/dynamic analysis, binary exploitation)
Nice to have: Radiation-tolerant electronics design
Nice to have: TID/SEU analysis for space systems
Nice to have: High-speed digital/communication interfaces (10GbE, SERDES)