This position requires a person to perform both GMAW and GTAW to fabricate medical devices.
Compensation
Pay rate: $20.00- $21.00/hr
Responsibilities
Operating welding equipment including, but not limited to, both GMAW (MIG) and GTAW (TIG)
Perform simple measurements using micrometers, angle finders and calipers
Read and understand blueprints
Complete and understand documentation needed to comply with S.N.E. policies, Quality Manual and procedures including, but not limited to: FDA, QSR and various domestic and international standards and regulations
Work in a Team environment using the skills of communicating, listening and participating in developing continuous improvement on products and processes
Requirements
High School education or equivalent
Vocational or Technical degree or equivalent military experience
The Sheet Metal Mechanic performs journey-level fabrication, installation, alteration, and repair work on a wide range of metal components and systems across University facilities, supporting construction and renovation projects involving HVAC, architectural, structural, and custom-fabricated metal systems.
Compensation
Pay Range Minimum: $67,320.00 annual
Pay Range Maximum: $89,436.00 annual
Responsibilities
Design, fabricate, install, modify, and repair diverse metal components and systems using stainless steel, galvanized and mild steel, aluminum, copper, brass, and other materials
Fabricate and install sinks, counters, trays, pans, shelving, casework, and other custom sheet metal components
Layout, fabricate, and install HVAC components, fixtures, fittings, ductwork, and related mechanical system components
Fabricate and install architectural and structural metal components, including decking, roofing, stairs, railings, ramps, metal buildings, tools, and other custom components
Perform work from blueprints, drawings, specifications, technical manuals, field measurements, and verbal instructions
Requirements
Completion of a recognized apprenticeship as a sheet metal mechanic
Full journey status as a sheet metal mechanic in a union
Four years’ applicable work experience
Nice to have: Structural Welding Certification from the Washington Association of Building Officials (WABO)
Nice to have: Familiarity with SMACNA standards and design guidance
Welder II
Nikkiso Cryogenic Industries · Posted Nov 17, 2026
Designs and constructs alternative fuel stations for fuels such as liquefied natural gas (LNG), compressed natural gas (CNG) and hydrogen (H2), involving pipe welding and process system installation.
Compensation
$20.41 To $32.83 per Hour
Responsibilities
Stainless tube (1/4" – 3/4") installation
Stainless and carbon steel threaded pipe (1/2" - 2")
Stainless and carbon steel welded pipe per ASME B31.3
Journeyman Industrial Combo-Welder responsible for joining metal parts using heat or electric arc-welding equipment, including GTAW, FCAW, and TIG processes on carbon steel, stainless steel, and aluminum.
Responsibilities
Join metal parts such as pipe or metal plates using heat or electric arc-welding equipment
Perform full penetration welds with SMAW and flux core welding applications
Start and complete x-ray welds using the GTAW and SMAW weld processes
Check the weakness of work pieces and measure work pieces to ensure specifications are met
Maintain and operate welding equipment properly following safety regulations
Develop, qualify, and maintain Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and related welding documentation for hardfacing, overlay welding, and valve fabrication applications.
Responsibilities
Develop, qualify, and maintain Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and related welding documentation for hardfacing, overlay welding, and valve fabrication applications.
Define welding parameters, consumables, preheat requirements, interpass controls, and process specifications to achieve consistent, high-quality results.
Drive welding process improvements that enhance quality, productivity, efficiency, and cost performance.
Provide technical support for the fabrication of Triple Offset Valves, Ball Valves, pressure-containing components, and critical valve assemblies.
Prepare weld maps and provide guidance on welding sequences, distortion control, and fabrication best practices.
Requirements
Bachelor's degree in Mechanical Engineering
Bachelor's degree in Metallurgical Engineering
Bachelor's degree in Welding Engineering
Diploma or specialized training in Welding Technology
Nice to have: Stellite hardfacing using PTA, GTAW, or GMAW processes
Performing a variety of welding tasks on pipelines and related structures, ensuring high-quality, code-compliant welds in diverse environments for the APEX 43427 (AC) project.
Locations (2)
Nexus, Texas, United States
Hubbard, Texas, United States
Compensation
Competitive compensation, paid weekly.
Responsibilities
Perform multi-process welding (SMAW, GMAW, FCAW, GTAW) on various materials including carbon steel, stainless steel, and other alloys, primarily for pipeline construction and maintenance.
Interpret blueprints, welding procedures, and project specifications to determine appropriate welding techniques and ensure compliance.
Operate and maintain welding equipment, including arc welding machines, gas cutting torches, and grinding tools.
Prepare workpieces for welding by cleaning, grinding, and beveling as required.
Conduct pre-heat and post-heat treatments as specified by welding procedures.
The fabricator is in charge of fabricating new parts and repairing existing systems using various welding processes. This position assists maintenance in all areas to ensure that the facility runs at peak efficiency before, during, and/or after production.
Compensation
$22.35 - $31.95 (pay based on experience) + $2 attendance bonus + $2 premium $3 shift differential for B shift
Responsibilities
Communicate through appropriate departmental channels, equipment malfunctions and corrective action taken as well as quality problems
Perform essential duties within guidelines of company GMP’s, HAACP, PSM Program, Company Policies and Safety Programs (LOTO)
Assist in working with all Maintenance team members on rebuilds, installs and general projects throughout the facility
Complete and maintain all required paperwork, reports, and departmental forms
Perform preventive maintenance check and inspection on assigned equipment, report findings to supervisor, and take appropriate action
Requirements
A two-year program in fabrication or welding or have 2 years verifiable experience as a fabricator
Help build Hygienic Fluid Handling Pumps, Valves, and ASME-certified heat exchangers from carbon steel, stainless steel, and other alloys using blueprints to lay out, fit, and weld components for pumps, valves, and pressure vessels.
Compensation
The hourly wage for this role is typically $27.00 - $30.00/hour.
Responsibilities
Fit and weld ASME Code and structural work
Selects equipment, plans layout, assembly, fit-up, and welds in accordance with SOP’s, Standard Specs and identified WPS’s
Lays out, positions, aligns, fits components together and performs welding operations in accordance with Weld Maps, drawings or other customer requirements
Sets up equipment and welds parts, using GTAW, GMAW, and FCAW welding processes per WPS or other applicable standards
Perform quality checks and continuously inspect their materials and production to ensure product is in conformance
Requirements
High school diploma or GED
Associate degree in Welding Technology preferred
Manual welding certification from a technical school preferred