The Senior Power System Secondary Engineer acts as the technical authority on behalf of the project developer, providing independent oversight, review, and governance of all secondary systems engineering, testing & commissioning (T&C) contractors, and site Operations & Maintenance (O&M) teams.
Responsibilities
Lead the review and provide technical governance during critical project phases, including witnessing Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT), and reviewing commissioning procedures for all secondary and primary systems.
Review and approve Inspection & Test Plans (ITPs), testing protocols, punch lists, relay setting sheets, switching programs, and commissioning records to ensure safe energization of HV substations and plant systems.
Manage and audit third-party T&C contractors and EPC commissioning teams from pre-commissioning through to final energization and Commercial Operation Date (COD).
Act as the Owner's Engineer representative in technical workshops, design review meetings, and factory/site visits with contractors and OEMs.
Provide technical leadership and functional oversight to site-based O&M engineers and technicians, establishing standardized preventive and corrective maintenance frameworks.
Requirements
Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or a closely related field
Valid OETC Protection Authorization (Level 2 or Level 3)
Nice to have: Familiarity with DCRP regulations and Distribution Safety Rules for 33 kV collector networks
Nice to have: Professional Engineering registration (PE / CEng or equivalent)
Perform electrical testing, inspection, troubleshooting, and commissioning on utility‑scale solar farms, battery energy storage systems, transformers, switchgear, and low‑ and medium‑voltage electrical systems.
Locations (3)
Minneapolis, Minnesota, United States
Illinois, United States
Minnesota, United States
Responsibilities
Develop and execute electrical testing plans based on project specifications
Select, configure, and safely operate test equipment
Perform primary‑injection testing on electrical equipment and systems
Perform transformer testing including turns ratio, insulation‑resistance, winding‑resistance, and power‑factor testing
Inspect and test switchgear, circuit breakers, instrument transformers
Requirements
Pre-Commissioning Engineer - Power / Energy domain
Lead and execute pre-commissioning and site acceptance testing (SAT) activities for high-voltage power electronic systems.
Compensation
Salary range: PLN 18000 - PLN 25000 (gross/month)
Responsibilities
Lead and execute pre-commissioning and site acceptance testing (SAT) activities for high-voltage power electronic systems
Perform comprehensive hardware and system-level tests to verify performance against design specifications
Act as the primary technical resource onsite to identify, document, and resolve hardware and software defects during the commissioning phase
Act as the technical face of the company onsite, leading customer walk-throughs and providing technical explanations for test results and system behaviour
Ensure all test reports, inspection checklists, and compliance documentation are accurate, signed off, and archived according to project requirements
Requirements
Bachelor’s or Master’s degree in Electrical Engineering
Design authority for Control & Protection engineering tasks of low to medium complexity, preparing schematics up to 400 kV and coordinating with engineering leads.
Responsibilities
Prepare Key Line Diagrams, Protection Interface Diagrams, Feeder Block Diagrams & Trip Matrix, signal lists and interlocks
Prepare schematics for Control & Relay Panel for new and existing setups
Prepare Cable Block Diagrams, relay ordering information, Cable Schedules and create lists for wiring, termination, and labelling for panel manufacturing
Conduct technical risk and opportunity assessments and estimate engineering hours
Coordinate with various departments for design progress and completion
Responsible for the installation, programming, testing, and maintenance of protective relaying and metering systems used in transmission and distribution operations.
Responsibilities
Programs, installs and maintains protective relaying and metering
Performs electrical tests and repairs
Analyzes test results and interprets electrical diagrams
Uses hand, power tools, meters and other test equipment in energized electrical rooms, vaults, and substations
Applies, reads, understands, reviews and corrects schematic, wiring diagram blueprints and substation drawings
Requirements
Associate’s degree
Bachelor’s degree
Nice to have: NETA
Nice to have: NICET
Nice to have: OEM certified field service training program
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. The technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (2)
Charleston, West Virginia, United States
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment
Complete daily job hazard analyses (JHAs)
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. Once in the field, the technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (4)
Kalamazoo, Michigan, United States
United States, United States
Canada, Canada
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites, from basic measurements to acceptance and maintenance testing.
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. The technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (4)
Fort Wayne, Indiana, United States
United States, United States
Canada, Canada
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
The Field Service Technician – Development Program is a full-time, entry-level technical role filled through the POWERX National Technician Development Program. New hires complete five weeks of paid, structured classroom and hands-on training before deploying to the field. The technician performs a broad range of electrical field testing, commissioning, and service activities on power systems equipment at customer sites nationwide.
Locations (4)
Athens, Ohio, United States
United States, United States
Canada, Canada
Phoenix, Arizona, United States
Responsibilities
Assist senior technicians with electrical field testing, commissioning, and service activities on power systems equipment at customer sites
Execute assigned test points and procedures accurately.
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment, including PPE, lockout/tagout (LOTO), and live-dead-live verification.
Complete daily job hazard analyses (JHAs).
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers.
Requirements
High school diploma or GED
Associate degree or a trade/technical school certificate or diploma (preferred)
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment
Complete daily job hazard analyses (JHAs)
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
Requirements
High school diploma or GED
Associate degree or a trade/technical school certificate or diploma (preferred)
Nice to have: NETA certification
Nice to have: Working knowledge of protective relay concepts
Execute assigned test points and procedures accurately
Apply NFPA 70E requirements and site-specific safety rules on energized and de-energized equipment
Complete daily job hazard analyses (JHAs)
Set up and operate relay test sets (Doble, Omicron, Megger), insulation-resistance testers, HiPot equipment, digital multimeters, and power-quality analyzers
Requirements
High school diploma or GED
Associate degree or a trade/technical school certificate or diploma (preferred)