As a Senior Radio Field Service Technician, you will ensure the reliability and performance of VHF/HF communication systems that support mission-critical operations. You will install, maintain, and repair complex radio and communication systems to ensure seamless functioning of essential infrastructure.
Compensation
The starting salary for this role is $25-31/per hour.
Responsibilities
Install, maintain, test, adjust, troubleshoot, and repair VHF/HF communication systems, including radio equipment, antenna systems, remote-control equipment, and associated communications infrastructure.
Perform preventive maintenance, inspections, system upgrades, and corrective repairs to optimize system performance.
Conduct RF testing and measurements, including transmit power, reflected power/VSWR, receiver sensitivity, and modulation, using test equipment such as spectrum analyzers, RF signal generators, VNAs, power meters, oscilloscopes, and multimeters.
Diagnose and resolve issues related to antennas, feedlines, connectors, grounding systems, and lightning protection systems.
Trace and resolve transmit/receive audio, PTT/keying, and remote-control path faults.
Requirements
HS diploma (or equivalent, e.g. G.E.D. in the US)
Vocational/technical education in related discipline
Nice to have: Active FCC General Radiotelephone Operator License (GROL)
Nice to have: VHF and HF transmitters and receivers experience
Ensure the reliability and performance of VHF/HF communication systems by installing, maintaining, and repairing complex radio and communication systems to support mission-critical operations.
Compensation
The starting salary for this role is $25-31/per hour.
Responsibilities
Install, maintain, test, adjust, troubleshoot, and repair VHF/HF communication systems
Perform preventive maintenance, inspections, system upgrades, and corrective repairs
Conduct RF testing and measurements using spectrum analyzers, RF signal generators, VNAs, power meters, oscilloscopes, and multimeters
Diagnose and resolve issues related to antennas, feedlines, connectors, grounding systems, and lightning protection systems
Trace and resolve transmit/receive audio, PTT/keying, and remote-control path faults
Requirements
HS diploma (or equivalent, e.g. G.E.D. in the US)
Vocational/technical education in related discipline
Nice to have: Active FCC General Radiotelephone Operator License (GROL)
Nice to have: VHF and HF transmitters and receivers experience
Nice to have: Radio audio and control interfaces (2-wire/4-wire audio, PTT/keying, RS-232, RS-485, IP-based radio interfaces)
Drive leading-edge PCIe and Ethernet solutions from deep silicon characterization through to system-level deployment, bridging core hardware validation and real-world system architecture.
Compensation
The annual base salary range for this position is USD 121,900.00 To USD 195,000.00
Responsibilities
Design and develop advanced SerDes hardware validation platforms
Lead deployment of PCIe products into broader data center architectures
Evaluate SerDes Transmit and Receiver performance at speeds up to 128 Gb/s for both PCIe and Ethernet
Perform extensive Rx validation on CTLE, ADC, DFE, FFE, PAM4, and FEC hardware
Perform precise PCIe calibration using Valiframe BitifEye, EZJIT, Seasim/SigTest, and COM-based packages
Requirements
Master’s degree in Electrical or Computer Engineering
Bachelor’s degree in Electrical or Computer Engineering
Lead SoC-level testing and bring-up of copackaged optics (CPO) SerDes interfaces, developing automated Python-based test frameworks and executing lab validation.
Responsibilities
Own SoC-level validation and bring-up of high-speed SerDes interfaces for copackaged optics, including test planning, execution, and reporting
Develop robust automated test suites in Python (e.g., pytest-based frameworks) to exercise SerDes PHY, link training, loopback, PRBS, margining, and stress tests
Perform signal integrity and link characterization using lab equipment (oscilloscopes, BERTs, VNAs, protocol analyzers), and analyze eye diagrams, jitter, BER, and equalization settings
Validate protocol-level behavior and interoperability for UCIe (die-to-die) and PCIe (preferably Gen5/Gen6), including link bring-up, error handling, and compliance testing
Collaborate with firmware and RTL/DFT teams to triage issues across layers (PHY, link, protocol), use JTAG, logic analyzers, and debug tools to isolate defects
Lead SoC-level testing and bring-up of copackaged optics (CPO) SerDes interfaces, developing automated Python-based test frameworks and executing lab validation.
Responsibilities
Own SoC-level validation and bring-up of high-speed SerDes interfaces for copackaged optics, including test planning, execution, and reporting
Develop robust automated test suites in Python (e.g., pytest-based frameworks) to exercise SerDes PHY, link training, loopback, PRBS, margining, and stress tests
Perform signal integrity and link characterization using lab equipment (oscilloscopes, BERTs, VNAs, protocol analyzers), and analyze eye diagrams, jitter, BER, and equalization settings
Validate protocol-level behavior and interoperability for UCIe (die-to-die) and PCIe (preferably Gen5/Gen6), including link bring-up, error handling, and compliance testing
Collaborate with firmware and RTL/DFT teams to triage issues across layers (PHY, link, protocol), use JTAG, logic analyzers, and debug tools to isolate defects
As a Staff Verification Engineer, you will be at the forefront of validating and delivering high-reliability products and test systems for next-generation hardware. This role is ideal for a hands-on engineer who thrives in a fast-paced environment and enjoys working across electrical, mechanical, RF, and software domains. You’ll own the full lifecycle in executing complex test systems—from concept and design to automation and compliance ensuring our products meet the highest standards of performance, reliability, and regulatory readiness.
Locations (3)
Toronto, Ontario, Canada
Leeds, England, United Kingdom
United States
Compensation
The salary range for this role based in Toronto, ON, Canada is $ 140,000 CAD - $162,500 CAD. This compensation will ultimately be in line with the location in which the position is filled. Final compensation for this role will be determined by various factors such as a candidate’s relevant work experience, skills, certifications and geographic location. This role is eligible for variable compensation including short term and long-term incentives.
Responsibilities
Create and execute engineering design verification (DV) test plans using circuit design knowledge and best practices for DUT bench testing
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of Google's direct-to-consumer products. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
Design and deliver high-complexity Printed Circuit Board Assembly (PCBA) characterization boards, breakout fixtures, and lab test rigs to support advanced Serializer/Deserializer (SerDes) validation.
Own end-to-end board hardware development, including component selection, schematic capture (Cadence Concept HDL/OrCAD), stackup definition, and layout routing constraints.
Work in tight partnership with Signal Integrity (SI) and Power Integrity (PI) teams to optimize high-frequency trace routing, via transitions, connector launches, and Power Delivery Network (PDN) performance up to millimeter-wave frequencies.
Manage board fabrication and assembly with manufacturing partners, driving Design for Manufacturability (DFM)/Design for Assembly (DFA) reviews and resolving technical issues to guarantee on-time delivery.
Perform initial hardware bring-up, power sequencing verification, and passive/active fixture characterization in the lab using Vector Network Analyzers (VNAs) and Time Domain Reflectometry (TDRs).
Join our SERDES team at the forefront of high-speed connectivity design. You'll work hand-in-hand with mixed-signal designers to characterize, analyze, and debug cutting-edge SERDES architectures.
Compensation
The annual base salary range for this position is $76,000 to $114,000.*
Responsibilities
Shape next-generation IP
Build smart tools
Engineer test hardware
Solve hard problems
Communicate impact
Requirements
BS/MS in Electrical Engineering or Engineering Physics
As a Senior RF Engineer, you'll be the technical authority for RF on our satellite platform. You'll own the architecture of our TT&C, IoT and software-defined radio systems, set the standards the team designs and tests to, and mentor junior Engineers. It's a hands-on role: you'll still be at the bench and in the simulator, while shaping the RF roadmap and seeing your designs through qualification, launch and into orbit.
Responsibilities
Own RF architecture across UHF and S-band TT&C, IoT payloads (NB-IoT, LoRaWAN) and SDR, and assess new bands as missions demand
Turn mission and customer needs into RF requirements, specifications and interface definitions
Produce and own link budgets, cascade analyses and frequency plans
Design, simulate and review RF and mixed-signal hardware, from front-ends to SDR boards, and lead RF PCB layout reviews
Lead antenna selection and integration with Mechanical and Systems
Nice to have: Radio audio and control interfaces (2-wire/4-wire audio, PTT/keying, serial communications (RS-232, RS-485), and IP-based radio interfaces)