Satellite Electrical Power and Harness Systems Engineer responsible for the design, analysis, testing, and operation of power systems across various vehicle classes, focusing on EPS and Harness subsystems for satellite development projects.
Define and own the power delivery architecture for next-generation optical interconnect modules, setting regulator topology, power budgets, and PDN targets.
Responsibilities
Define the module and package power architecture, including rail tree, regulator topology, and power domain partitioning.
Own the module power budget and industry module specifications.
Design power-up, power-down, and fault sequencing.
Select regulators, PMICs, inductors, capacitors, and protection components.
Set PDN target impedance and decoupling strategy for each rail.
Requirements
Bachelor's in Electrical Engineering or related field
Master's or Ph.D. focused on power electronics or power delivery
Nice to have: Power electronics
Nice to have: Power delivery design for high-performance ASICs
Responsible for developing circuit board test systems from initial requirements to release to manufacturing, including circuit analysis, schematic and layout design, board testing and troubleshooting, and yield analysis.
Compensation
The annual salary range for this role is $90,000 – $120,000. This is the range that we in good faith believe is the range of possible compensation for this role at the time of this posting. This range may be modified in the future. This job is also eligible for up to a 10% annual bonus.
Responsibilities
Analyze, design, and develop analog and digital circuits.
Collaborate with software, mechanical, design, and manufacturing teams to bring test solutions from initial design to deployment to production.
Perform bench evaluation of circuit board designs.
Write specifications, test procedures, and test reports.
Modify test firmware for embedded systems and scripts for automated testing.
Requirements
B.S. Degree in Electrical Engineering or related technical discipline
Define and refine requirements and develop verification artifacts for satellite electrical power and/or harness subsystems
Perform detailed power subsystem analyses including battery performance modeling, bus voltage regulation, redundancy and fault-tolerance strategies
Conduct harness analyses such as voltage drop calculations, fuse blow assessments, short circuit clearing, FMEA
Develop, maintain, and update vehicle-level power budgets for all mission phases
Assume end-to-end ownership of the EPS/harness subsystem throughout the spacecraft lifecycle
Requirements
Bachelor of Science degree in Engineering, Engineering Technology, Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent
Nice to have: 5+ years of related work experience
Nice to have: 9+ years of related work experience
Nice to have: experience with space related electrical power and harness subsystems
Nice to have: knowledge of industry space qualification standards and guidelines
Skills
Electrical Engineer
Westinghouse Electric Company, LLC · Posted Nov 11, 2026
The base salary range for this position, which is dependent upon experience, qualifications and skills, is estimated to be $58,400 to $73,000 per year.
Responsibilities
Provide electrical system engineering design, instrumentation and controls (I&C) designs, and electrical system wiring
Use standards, techniques, procedures and criteria for development of electrical engineering design documents including calculations and specifications
Use software packages such as Mathcad, Matlab, PSPice or equivalent
Learn new software packages
Work with teams on similar engineering level to obtain necessary information and knowledge transfer
The Senior Electrical Engineer – Supervisor is a lead role that involves overseeing a team within the Electrical Engineering group in the design, development, testing, and implementation of electrical systems for TSI’s precision instruments, including particle, gas, and flow measurement sensors and devices.
Compensation
Competitive market salary from $130,000 - $145,000 per year* depending on qualifications and experience. For eligible Leadership and individual contributor roles, additional bonus opportunities may be available and awarded at the discretion of the Company.
Responsibilities
Solve complex technical design and development problems, and create architecture for electrical systems, design circuits, and printed circuit assemblies
Write firmware for the embedded system to control and process sensor readings
Lead development of printed circuit assemblies, designing circuit to meet technical specification and ensure that the product meets electromagnetic compatibility requirements
Independently design, simulate, test, and debug moderately complex to complex electrical circuits to ensure compliance with customer needs, design specifications, and quality standards
Apply problem solving skills to analyze new and unfamiliar engineering problems and review potential solutions with other engineers and/or project leads, when necessary
Requirements
Bachelor’s degree in Electrical Engineering or related field
Master’s degree in Electrical Engineering or related field
Be a part of the growing Audio Engineering team that seeks to deliver experiences to every place where audio matters! The Bose Audio Technology Licensing group is seeking a passionate, hands-on Acoustical Engineer to take part in supporting our dynamic needs as we develop partnerships across many industries – all with the goal of finding new opportunities to widely deploy Bose technologies.
Compensation
The hiring range for this position in the primary work location of Framingham, Massachusetts is: $88,500-$121,650.
Responsibilities
Collaborate with engineering team members to design, build, and test headphone products with audio playback, active noise cancellation, and voice pickup features
Investigate and develop acoustic system design concepts to achieve product performance requirements
Use simulation tools to predict acoustic system behavior
Define, build, and characterize physical prototypes of acoustic systems
Conduct acoustic measurements of components, subsystems, and full assemblies and perform analysis of results
Requirements
BS in Acoustical, Mechanical or Electrical Engineering
MS Preferred
Nice to have: Bluetooth/wireless technology product development experience
Responsible for research and development of electric motor drives, including modeling, simulation, analysis, and verification of motor drive systems for automotive applications.
Responsibilities
Responsible for analysis, modeling, simulation, and implementation of control algorithms of motor drive systems (motor control and power converters) for various motion control applications, such as steering, brakes, and robotic actuators.
Implements control algorithms for various electric machine topologies and power converter commutation/switching techniques for various power electronic converters to achieve efficiency, NVH, and EMI targets.
Coordinates technical projects pertaining to electric drive systems with cross-organizational teams.
Stays abreast of new technology and recent developments/trends in the research and academic arena relative to motion control techniques.
Calibration, testing, and validation of motor control and power electronic system requirements, as well as diagnosing and correcting deficiencies in designs and prototypes.
Requirements
M.S. in Electrical Engineering (required)
Ph.D. in Electrical Engineering (preferred)
Nice to have: Strong understanding and hands-on experience with various semiconductor switches (MOSFET, IGBT, SiC, GaN) is preferred
Nice to have: Background in automotive engineering and chassis systems (steering, braking, etc) is preferred
R&D Electrical Hardware & Systems Engineer
Nexteer Automotive Corporation · Posted Nov 11, 2026
Develop next-generation electromechanical brake (EMB) and brake-by-wire systems for automotive applications, owning the electrical hardware and electrical systems engineering from system requirements through prototype validation.
Responsibilities
Research, develop, and validate electrical hardware for electromechanical brake actuators and brake-by-wire systems
Analyze system requirements and flow them down to electrical architecture, hardware, and component-level requirements, maintaining traceability
Define and document hardware/software interfaces for sensors and actuators
Design, analyze, and optimize analog, digital, mixed-signal, sensing, motor drive, and power electronic circuits
Develop schematics and support PCB layout for electronic control units and power stages
Platform Power ArchitectNewMixx Technologies · Bengaluru, India
Satellite Electrical Power and Harness Systems EngineerNewBoeing · El Segundo, US
Electrical EngineerNewWestinghouse Electric Company, LLC · Rock Hill, US+1 more
Senior Electrical Engineer - SupervisorNewTSI, Inc. · Shoreview, US
HW Design EngineerNewALTEN Technology USA · Palo Alto, US
R&D Electric Motor Drives EngineerNewNexteer Automotive Corporation · Saginaw, US