Respond to service calls within a hospital or healthcare system in St Lucie/ North Palm Beach, FL. Evaluate, diagnose, and perform repair and planned maintenance on biomedical equipment, providing service excellence to drive customer satisfaction.
Locations (2)
St Lucie, Florida, United States
North Palm Beach, Florida, United States
Compensation
GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation.
Responsibilities
Evaluate customer biomedical equipment issues, implement appropriate repairs, and perform planned maintenance and safety and environmental inspections to support our customers’ ability to deliver healthcare.
Adhere to company policies, procedures, and hospital protocols, to ensure regulatory and compliance requirements are met; ensure documentation of all work performed is captured.
Maintain strong relationships and frequent communications with customers to ensure resolution and proper follow-up, to ensure ongoing customer satisfaction.
Maintain proper care of tools and test equipment to ensure calibration and ability to deliver timely and accurate repairs and maintenance to our customers.
Identify and report all customer quality or compliance concerns immediately to the Quality Organization to ensure services are provided with the highest ethical standards.
Requirements
Associate’s or bachelor’s degree in Electrical Engineering, Biomedical Engineering, Mechanical Engineering, or related field
High School Diploma/GED and a minimum 2 years of experience servicing electrical, electronics, IT or mechanical equipment
Nice to have: Electronic digital circuitry knowledge
Nice to have: Electronic and electro-mechanical device understanding
Lead electrical sustainment of radar products, managing design updates, troubleshooting, and supporting manufacturing and quality teams.
Locations (2)
Broomfield, Colorado, United States
Fort Collins, Colorado, United States
Compensation
US Salary Range: $114,000- $152,000
Responsibilities
Take ownership as the main point of contact for electrical sustainment of our radar products
Perform design updates of RF and embedded electronics, including hardware selection, schematic & PCB updates, drawing updates, and generation of output files
Troubleshoot system and board issues, translating non‑conformance dispositions into manufacturable repair drawings and work instructions
Author and release Engineering Change Requests/Orders (ECRs/ECOs) to improve drawings and design releases based on production feedback
Support sourcing teams with managing long‑lead and end‑of‑life components to ensure continuous production
Sr Electronic Engineer
Advanced Energy Industries, Inc · Posted Nov 13, 2026
We are seeking a Senior Electronic Engineer to support the development of next-generation Advanced Energy products for the Semiconductor and Industrial Temperature Measurement and Control markets. This role is responsible for the design, development, validation, and optimization of electronic and power electronic systems, contributing to both new product development and sustaining engineering initiatives.
Compensation
As part of our total rewards philosophy, we believe in offering and maintaining competitive compensation and benefits programs for our employees in order to attract and retain a talented, highly engaged workforce. Our compensation programs are focused on equitable, fair pay practices including market-based base pay, an annual pay-for-performance incentive plan, we offer a strong benefits package in each of the countries in which we operate.
Responsibilities
Design, develop, and validate electronic and power electronic circuits, subsystems, and products.
Participate in system architecture definition and support product platform development initiatives.
As an Assembler I, this position works to assemble products by positioning and installing components and subassemblies according to drawings and instructions. Using a variety of hand and power tools, fixtures, work instructions and test equipment that are needed to perform a series of operations to correctly assemble coolers.
Locations (2)
Tulsa, Oklahoma, United States
Broken Arrow, Oklahoma, United States
Responsibilities
Position parts and subassemblies by reading blueprints and instructions
Assemble components by examining connections for correct fit
Operate hand and power tools to connect parts
Perform tube installation and rolling operations
Keep equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions
Requirements
High School Diploma or GED
Nice to have: 1 year of professional experience related to manufacturing
Nice to have: Experience using industrial machines
Operator Technician II/III
Constellation Energy Generation, LLC. · Posted Nov 12, 2026
Responsible for start, stop and monitoring of equipment including reading gauges and meters and recording activities in operating logs and records. Performs a variety of plant maintenance tasks including diagnosis, maintenance and repair of mechanical and electrical equipment in a safe, efficient and economical manner. Performs overhaul maintenance and system improvement tasks. Performs chemical analysis and chemical control on steam, cooling and condensate systems, and maintains chemistry logs.
Compensation
Operator Technician II - $38.32 to $47.90 / hour
Operator Technician III - $42.92 to $53.65 / hour
Responsibilities
Start, stop and monitoring of equipment including reading gauges and meters and recording activities in operating logs and records
Measure, record and make adjustments within operating parameters using computers and monitoring equipment
Perform plant maintenance tasks including diagnosis, maintenance and repair of mechanical and electrical equipment
Perform overhaul maintenance and system improvement tasks
Perform chemical analysis and chemical control on steam, cooling and condensate systems, and maintains chemistry logs
Responsible for the installation, programming, testing, and maintenance of protective relaying and metering systems used in transmission and distribution operations.
Responsibilities
Programs, installs and maintains protective relaying and metering
Performs electrical tests and repairs concerned with maintenance and performance evaluation of in-service relays
Analyzes test results and interprets electrical diagrams to locate defective equipment
Proficiently uses hand, power tools, meters and other test equipment in energized electrical rooms, vaults, and substations
Applies, reads, understands, reviews and corrects schematic, wiring diagram blueprints and substation drawings
Requirements
Associate’s degree
Bachelor’s degree
Nice to have: NETA
Nice to have: NICET
Nice to have: OEM certified field service training program
Lead instrument mechanic responsible for installation, repair, maintenance, and calibration of instruments used in small arms and optics systems.
Compensation
$28.62/HR SCA Pay Rate and $5.09/HR H & W Benefits
Responsibilities
Performs the full range of work involved in the repair, service, maintenance and overhaul of any or all types M1A1, M1A2 (SEP) / M2, M3 Bradley / M109A6 Howitzer / hull and turret LRU’s.
Performs preventive and corrective maintenance on instruments and automated systems, including troubleshooting issues and replacing defective parts.
Performs the full range of work involved in the repair, service, test, maintenance and overhaul of various Ground/Aviation Night Vision Devices.
Determines the nature and extent of repairs required, disassembles; examines parts and inspects for serviceability, replaces and orders parts as required.
Uses hand and machine tools, precision gauges, test equipment, and alignment devices in making repairs, modifications and adjustments.
Requirements
High School graduate or equivalent
Nice to have: formal training in artillery and/or optic maintenance and repair at DS/GS level
Nice to have: certification in instrumentation technology or related field
Perform general and higher level maintenance service such as: plumbing, electrical, carpentry, appliance repairs, HVAC, etc. Respond on a timely basis to resident service requests.
Responsibilities
Perform general and higher level maintenance service such as plumbing, electrical, carpentry, appliance repairs, HVAC
Respond on a timely basis to resident service requests
Participate in preventative maintenance to include pool, exterior lighting, filter changes and apartment inspections
Clean work area, tools and equipment
Care, maintain, and inventory all supplies and equipment owned by the property and/or the management company
The Fire Sprinkler Inspector conducts inspections, testing, and maintenance of fire sprinkler and other water-based fire protection systems at customer sites, documents deficiencies, and works with our service and quoting teams to make sure issues are resolved quickly and correctly.
Compensation
$25–$30 per hour, based on experience. Overtime is paid as required by law.
Responsibilities
Inspect, test, and maintain wet, dry, preaction, and deluge sprinkler systems, standpipes, and related equipment according to NFPA 25, local codes, and customer requirements.
Perform main drain tests, inspector’s test valve flow tests, waterflow alarm and supervisory device tests, and dry pipe valve trip tests as scheduled.
Inspect and test fire pumps, backflow preventers, fire department connections, control valves, and private hydrants when included in the customer’s service agreement.
Check sprinkler heads, piping, hangers, and spare head cabinets for damage, corrosion, obstructions, recalled products, and proper coverage.
Identify, document (including photos), and report deficiencies and impairments, with recommendations for repairs or upgrades.
Requirements
High school diploma or equivalent
Nice to have: NICET Level I or higher in Inspection and Testing of Water-Based Systems
Nice to have: Backflow prevention assembly tester certification
Nice to have: Fire pump inspection and testing (NFPA 20 and NFPA 25)
The Fire Sprinkler Inspector conducts inspections, testing, and maintenance of fire sprinkler and other water-based fire protection systems at customer sites, documents deficiencies, and works with our service and quoting teams to make sure issues are resolved quickly and correctly.
Compensation
$25–$30 per hour, based on experience. Overtime is paid as required by law.
Responsibilities
Inspect, test, and maintain wet, dry, preaction, and deluge sprinkler systems, standpipes, and related equipment according to NFPA 25, local codes, and customer requirements.
Perform main drain tests, inspector’s test valve flow tests, waterflow alarm and supervisory device tests, and dry pipe valve trip tests as scheduled.
Inspect and test fire pumps, backflow preventers, fire department connections, control valves, and private hydrants when included in the customer’s service agreement.
Check sprinkler heads, piping, hangers, and spare head cabinets for damage, corrosion, obstructions, recalled products, and proper coverage.
Identify, document (including photos), and report deficiencies and impairments, with recommendations for repairs or upgrades.
Requirements
High school diploma or equivalent
Nice to have: NICET Level I or higher in Inspection and Testing of Water-Based Systems
Nice to have: Backflow prevention assembly tester certification
Nice to have: Fire pump inspection and testing (NFPA 20 and NFPA 25)