Join the Pulsed Electrical Distribution System (PEDS) team at CFS as we begin development on the next-generation power supplies that will power ARC, the first grid-scale commercial fusion power plant. Apply your power electronic experience to develop and qualify next-generation inverters and power supplies for ARC and beyond.
Responsibilities
Lead the testing, qualification and commissioning of SPARC power supplies operating up to 2kV and 50kA
Collaborate with power semiconductor device manufacturers to develop and qualify new Si and SiC devices for the next generation of high power (>10MVA) medium voltage power supplies for ARC tokamaks
Design and develop high-power 4Q H-bridge inverter topologies using SiC MOSFETs, IGBTs, or other high-power semiconductor devices for use within ARC tokamak power supplies
Lead the build, test, and validation of prototype 4Q power modules including the evaluation performance/losses and validate inverter protection mechanisms, fault detection, fault response time, and safe shutdown behavior
Model and simulate power electronic circuits and components to evaluate and characterize converter performance, efficiency, stability, etc
Requirements
Bachelor’s degree in power electronics based systems
Master’s degree in electrical engineering with a focus on Power Electronics
The Principal Engineer, Electrical & Electronics Engineering is a position centered around investigating and integrating component manufacturer new developments and strategies into Vertiv’s DC Power product portfolio.
Responsibilities
Investigate, evaluate, and track new component technologies, materials, and strategies from power electronics manufacturers (semiconductors, magnetics, capacitors, thermal solutions)
Serve as the subject matter expert for power electronics during customer engagements, specification reviews, and technical discussions
Translate customer requirements and industry trends into actionable technical guidance for development teams
Provide expert technical support and mentorship to global engineering teams
Evaluate emerging power semiconductor technologies (SiC, GaN, advanced Si) and recommend adoption strategies aligned with product roadmaps
Requirements
Bachelor’s degree in Electrical Engineering or closely related field
Master’s or Ph.D. in Electrical Engineering with Power Electronics focus
Nice to have: Wide-bandgap semiconductor technologies (SiC, GaN)
Lead power‑electronics architecture and validation for mobility converter systems
Responsibilities
Define converter use cases, boundaries and requirements
Translate application‑level requirements into converter‑level architecture
Screen and compare alternative inverter and DC/DC converter topologies
Develop reduced‑order and switching‑model simulations
Evaluate topology alternatives across efficiency, power density, cost, reliability, component stress, thermal performance, controllability, EMI/EMC, scalability and development risk
Requirements
Bachelor’s degree in Electrical or Electronics Engineering
Master’s degree in Electrical Engineering, Power Electronics, Electrical Drives, Control Systems or a closely related discipline
Nice to have: hands‑on experience in Electric or Hybrid Electric Vehicles
Design, specify, and test protection and grounding systems for medium- to high-voltage DC power systems in data center environments.
Responsibilities
Own protection and grounding for every zone, from a bipolar medium-voltage DC bus carrying hundreds of megawatts over miles to the 1,500 V solar and battery bus and the 800 V racks.
Specify, and where no product exists co-develop with vendors, the DC breakers, fuses, and disconnects for these buses, from medium-voltage feeders to hall buses carrying tens of thousands of amps.
Design fault clearing without conventional breakers where possible, using SSTs that stop switching within microseconds, isolators that open at zero current, and fuses only where paralleled units can backfeed, and prove it in electromagnetic transient studies.
Turn fault studies into requirements every SST, battery converter, and breaker vendor must meet: fault current contribution, interruption time, and coordination settings.
Run live short-circuit and interruption tests on an energized multi-SST bus that prove the design to insurers, lenders, and the authority having jurisdiction.
Write the control firmware for every SST cell and block: modulation, closed-loop voltage and current control, and voltage sharing across dozens of series-stacked cells. Build the fast protection path that detects a fault and shuts the converter down within microseconds, from sensing to safe state. Sequence startup, precharge, cell bypass, and the reconfiguration of the output from 800 V to 1,500 V. Connect cell controllers to the block master and the site control system across isolation barriers, with telemetry operators can act on.
Responsibilities
Write the control firmware for every SST cell and block: modulation, closed-loop voltage and current control, and voltage sharing across dozens of series-stacked cells
Build the fast protection path that detects a fault and shuts the converter down within microseconds, from sensing to safe state
Sequence startup, precharge, cell bypass, and the reconfiguration of the output from 800 V to 1,500 V
Connect cell controllers to the block master and the site control system across isolation barriers, with telemetry operators can act on
Prove the firmware on hardware-in-the-loop rigs before it runs on a high-voltage prototype
Requirements
Nice to have: Embedded targets for power control (TI C2000, Xilinx or Intel FPGAs)
Nice to have: Model-based design (MATLAB/Simulink, PLECS)
Nice to have: Hardware-in-the-loop platforms (Typhoon HIL, OPAL-RT)
Nice to have: Industrial communication (CAN, EtherCAT, fiber links)
Nice to have: Functional safety practice (IEC 61508, MISRA C)
Skills
R&D Electrical Hardware & Systems Engineer
Nexteer Automotive Corporation · Posted Nov 11, 2026
Develop next-generation electromechanical brake (EMB) and brake-by-wire systems for automotive applications, owning the electrical hardware and electrical systems engineering from system requirements through prototype validation.
Responsibilities
Research, develop, and validate electrical hardware for electromechanical brake actuators and brake-by-wire systems
Analyze system requirements and flow them down to electrical architecture, hardware, and component-level requirements, maintaining traceability
Define and document hardware/software interfaces for sensors and actuators
Design, analyze, and optimize analog, digital, mixed-signal, sensing, motor drive, and power electronic circuits
Develop schematics and support PCB layout for electronic control units and power stages
Lead design, development, testing, and analysis of high‑power solid‑state switching systems and related power electronics for defense and government applications.
Compensation
Salary at SARA is determined by various factors, including but not limited to location, the individual’s particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements. The projected compensation range for this position is $120,000 to $160,000 (annualized USD).
Responsibilities
Designing, developing, testing, and analyzing complex high‑power solid‑state switching systems and devices, gate‑drive circuits, snubber circuits, and protection circuits
Executing SPICE, thermodynamic, and electromagnetic models and simulations of complex high‑power solid‑state switching systems
Writing detailed technical reports and maintaining comprehensive project documentation
Assisting technical leadership with the development of Applied Research, Pulsed Power systems, Directed Energy systems, and measures of effectiveness of such systems
Supporting highly technical engineering and scientific teams on field test activities when and if necessary (moderate travel is required on occasion)
Requirements
Bachelor’s degree in Electrical Engineering or relevant field
Nice to have: Master’s degree or PhD in relevant field
Nice to have: 12 – 16 years of experience in Power Electronics for Pulsed Power and Directed Energy applications
Nice to have: Active DoD Top Secret or DoE Q clearance