Equipment Engineer II will play a key role in supporting and optimizing manufacturing equipment used in semiconductor manufacturing, advanced assembly, and electronics test operations. This position is responsible for the installation, qualification, maintenance, troubleshooting, and continuous improvement of equipment to ensure reliable, safe, and efficient production performance.
Responsibilities
Lead equipment installation, startup, qualification, and release-to-production activities for assigned manufacturing tools
Develop qualification plans, execute validation activities, and maintain supporting documentation
Support equipment capacity expansions, technology upgrades, and process transfers
Independently troubleshoot equipment failures and process interruptions using systematic problem-solving methodologies
Perform root cause analysis and implement corrective and preventive actions to improve equipment stability
Serves as the site Subject Matter Expert (SME) for steam, condensate, and natural gas distribution systems supporting a large pharmaceutical manufacturing and research campus, providing technical leadership for system reliability, asset management, maintenance strategy, infrastructure planning, and capital project support.
Locations (4)
West Point, Pennsylvania, United States
San Francisco, United States
Los Angeles, United States
Rahway, New Jersey, United States
Compensation
The salary range for the primary location of this role is: $117,000.00 - $184,200.00. The successful candidate will be eligible for annual bonus and long-term incentive, if applicable.
The Sr/Lead Validation Engineer is responsible for leading, managing and executing validation and qualification activities to ensure equipment, facilities, utilities, systems and processes comply with applicable regulatory requirements, industry standards and Genezen policies and procedures. The role provides technical leadership and oversight of the validation lifecycle in support and completion of MSAT & Validation project milestones as well as manufacturing support.
Locations (2)
Fishers, Indiana, United States
Lexington, Massachusetts, United States
Compensation
The anticipated annual salary range for the Sr/Lead Validation Engineer position is $120,000-$150,000. Actual annual salary and level will be determined based on relevant experience, skills and education.
Responsibilities
Lead and coordinate validation and qualification activities
Develop, implement and maintain the site Validation Master Plan
Establish validation strategies, policies, procedures in compliance with regulatory requirements
Protocol generation, execution support, data analysis, report generation and approval for various installation, operational and performance qualification activities
Responsible for providing end-to-end technical oversight of manufacturing technologies across suppliers, contract manufacturers, and automation partners, including technical support for on-market production at manufacturing sites.
Compensation
$100,700.00 - $167,900.00
Responsibilities
Lead and collaborate with internal and external cross-functional teams in the development of product assembly equipment, system architectures, robotic concepts, and tooling
Initiate and conduct feasibility studies and testing of new and modified designs, as well as analyze mechanical systems and equipment
Develop test plans, equipment requirements, protocols, and reports to ensure designs meet product specifications, regulatory requirements, and applicable standards for new equipment and processes, including IQ/OQ/PQ protocols
Review and approve equipment acceptance testing (FAT/SAT) and validation protocols (IQ/OQ/PQ), as well as reports for new or modified production equipment at contract manufacturing partners
Plan, design, develop, and execute equipment improvement projects, ensuring comprehensive documentation and timely communication with leadership and cross-functional teams
Requirements
Bachelor's degree in Electromechanical Engineering
Bachelor's degree in Industrial Controls Engineering
Vice President of Wafer Fab Operations accountable for delivering world-class operational performance across a III-V semiconductor manufacturing site serving AI infrastructure markets.
Compensation
Final base salary for the successful candidate will depend on multiple factors, including but not limited to, job location, where work will be performed, qualifications, work history and relevant experience. With our continual goal of making Lumentum a best place to work for our employees, we strive to offer employees competitive total compensation packages, which may include annual bonus, commission for certain sales roles, equity, and health and welfare benefits.
Responsibilities
Develop strategy for the manufacturing site to support the growing needs of the global business
Provide leadership in implementing and improving business systems to support manufacturing
Drive expansion efficiency and NPI velocity to maximize the growth of the site
Drive fab operations to deliver high-yield, high-throughput, high quality, perfect on-time delivery, and cost-effective production of InP photonic chips supporting AI-driven demand
Manage the financial performance of all aspects of the manufacturing site
Process Engineer responsible for managing and optimizing fabrication modules within the BI Microfab group, ensuring operational stability, yield, and throughput in a cleanroom environment.
Compensation
The anticipated base salary for this position is expected to be within the following range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. We also believe in aligning our employees’ success with the company's long-term growth. As such, in addition to base salary, Neuralink offers equity compensation (in the form of Restricted Stock Units (RSU)) for all full-time employees.
Implement Statistical Process Control protocols, monitor wafer metrics, and perform in-line metrology to swiftly address out-of-control conditions.
Direct root-cause investigations for process excursions and yield drop-offs by applying first-principles analysis, deploying countermeasures, and verifying long-term resolution.
Optimize line yield, cycle times, coating uniformity, and operating costs through systematic experimental design and statistical evaluation.
Lead equipment bring-up activities, from specifying requirements and supporting vendor evaluation to executing IQ/OQ/PQ protocols and establishing production recipes.
Requirements
Bachelor’s degree in Materials Science, Chemical Engineering, Electrical Engineering, Mechanical Engineering, Physics, or an equivalent technical discipline.
Provides direct, hands‑on Quality Assurance support for sterile and aseptic manufacturing operations, overseeing compliance, risk management, and regulatory readiness.
Responsibilities
Provide direct QA oversight of sterile and aseptic manufacturing activities within cGMP‑controlled cleanroom environments
Maintain an active QA presence on the manufacturing floor and in controlled manufacturing areas
Oversee aseptic processing activities, including cleanroom operations, aseptic interventions, APS/media fills, environmental and personnel monitoring, sterilization, disinfectant controls, and contamination‑control practices
Provide real‑time Quality guidance and risk‑based decision‑making during manufacturing operations
Review and approve batch records, manufacturing documentation, laboratory/GMP records, and associated documentation in support of batch disposition
Requirements
Bachelor’s degree in Biology, Chemistry, Microbiology, Pharmaceutical Sciences, Engineering, Quality, or a related scientific or technical discipline
Senior Validation Engineer supporting the full equipment lifecycle, developing and executing validation protocols, and ensuring compliance with GMP and regulatory standards.
Responsibilities
Develop, execute, review, and support approval of validation protocols and reports for equipment, systems, and processes
Coordinate validation activities and serve as a technical resource within assigned areas
Collect, compile, analyze, and interpret validation data to confirm and maintain the validated state of equipment
Develop and review validation lifecycle documentation including SOPs, VMPs, URS, FRS, Design Specifications, FAT/SAT, and DQ/IQ/OQ/PQ/PV protocols
Support contracted resources by providing direction on validation activities and reviewing documentation for compliance
The Manager, Quality Facilities and Maintenance provides independent Quality oversight of the facilities, utilities, critical systems, equipment maintenance, calibration, and pest control activities that support manufacturing operations.
Compensation
The estimated base salary for this position is $112,000 - $140,000 annually. This position may also be eligible for discretionary bonuses.
Responsibilities
Provide independent Quality oversight of facilities, utilities, critical systems, equipment maintenance, calibration, and pest control activities supporting all manufacturing areas and shifts.
Serve as the Quality point of escalation for facility and maintenance issues, such as equipment failures, utility or environmental excursions, building and infrastructure conditions, and pest activity; assess product, process, and compliance risk and direct containment, impact assessment, and escalation to site Quality leadership as required.
Partner with Facility Engineering, Maintenance, Calibration, Environmental Health and Safety, Manufacturing, and Quality Line Operations to ensure facility and maintenance issues are addressed, mitigated, or remediated in a timely manner; track open actions through closure.
Oversee the Total Integrated Quality (TIQ) Assessment Program, including assessment scheduling, execution, documentation, and reporting; identify potential compliance issues, preventive actions, process improvements, and cost savings, and ensure follow-up actions are assigned and completed.
Draft, review or approve deviations, nonconformances, investigations, CAPAs, and risk assessments; ensure root causes are identified, actions are appropriate and sustainable, and effectiveness is verified.
Senior Manufacturing Engineer responsible for supporting, improving, and sustaining manufacturing processes for Class 3 printed circuit board assembly production in a high-mix, low-to-medium volume environment.
Compensation
$80,000—$120,000 USD
Responsibilities
Support day-to-day manufacturing operations for Class 3 PCBA assembly, rework, test, coating, and final inspection processes.
Provide technical guidance to production teams to resolve manufacturing issues, bottlenecks, yield concerns, and process interruptions.
Review customer documentation, assembly drawings, BOMs, specifications, and work instructions to ensure manufacturability and process readiness.
Develop, maintain, and improve manufacturing processes for SMT, selective solder, hand solder, mechanical assembly, conformal coating, and related production areas.
Support new product introduction builds, first article builds, prototype production, and production ramp activities.
Requirements
Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related technical field
Review and approve qualification documentation on behalf of the validation department and support the generation and implementation of validation programs
Requirements
Bachelor's degree in Engineering, Biotechnology, Biological Sciences, or a related technical discipline