Mid-level or Senior Electromagnetic Effects Engineer driving the design, analysis, test, and mitigation of electromagnetic compatibility challenges on advanced aerospace and defense platforms.
Compensation
Summary pay range (Level 3): $112,200 - $151,800
Summary pay range (Level 4): $136,850 - $185,150
Responsibilities
Conduct and oversee complex Validation/Verification qualification efforts at the system (MIL-STD-464/ADS-37A-PRF), and subsystem (MIL-STD-461) levels to ensure continued airworthiness operation.
Support an active manufacturing environment to ensure EMC compliance throughout the build cycle of multiple rotorcraft and products.
Perform EM and transient modeling using tools such as HFSS, CST, FEKO, or COMSOL and correlate with circuit/transient simulations (SPICE, PSCAD, or equivalent).
Develop and execute EMC test plans (conducted/radiated immunity, surge/lightning, MIL-STD/SAE/DO‑160/IEC/IEEE cases) and analyze results to identify root causes and corrective actions.
Design and validate mitigation measures (filters, bonding, shielding) to reduce coupling between RF and electrical systems and support manufacturable implementations.
Requirements
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical)
Design, build, integrate, and test RF hardware and systems for aircraft and ground stations, including antennas, radios, and RF modules, while developing requirements, test plans, and troubleshooting performance issues.
Compensation
The salary range listed for this role is intended as a general guideline. Final compensation will be determined based on a variety of factors, including role scope and responsibilities, relevant experience, education and training, key skills, market data, and business needs.
Responsibilities
Define RF system requirements, architectures, interfaces, and verification approaches.
Develop block diagrams, link budgets, interface documentation, test plans, and integration procedures.
Design, build, integrate, and test RF hardware including antennas, radios, RF modules, cabling, connectors, and supporting electrical assemblies.
Execute RF testing, including conducted RF tests, antenna measurements, environmental testing, and system-level validation.
Troubleshoot RF performance issues and drive corrective actions through design, build, integration, and test.
Requirements
Bachelor’s degree in electrical engineering or a related field
Nice to have: Master’s degree in antennas, RF systems, microwave circuits, communications
Nice to have: L,S,C,Ku,Ka-band systems
Nice to have: aerospace, defense, aircraft, spacecraft, UAV, missile, flight test experience
Nice to have: modulation schemes QAM,BPSK,QPSK,SOQPSK
Lead and execute the design, development, and evaluation of next-generation RFID sensor antennas.
Compensation
At RADAR, your base pay is one part of your total compensation package. The expected base salary range for this position is $190,000 - $233,000.
Responsibilities
Design, simulate, and optimize custom RFID sensor antennas, including single-element and multi-element array configurations using electromagnetic simulation software.
Perform full-wave electromagnetic simulations to evaluate antenna performance metrics including impedance matching, radiation patterns, efficiency, isolation, polarization, and coupling of antenna designs.
Conduct precise antenna calibration and performance characterization in an anechoic chamber.
Oversee the fabrication of PCB-based antennas and seamless integration with RF front-end components.
Work alongside hardware and software teams to integrate antenna solutions into compact sensor form factors.
Requirements
BS degree or higher in Electrical Engineering, Applied Physics, or a related field
Lead design, integration, analysis, test, and production activities for low observable materials, structures, apertures, sensors, and radomes for mission systems.
Compensation
Summary pay range: Level 4: $136,850-$185,150
Responsibilities
Lead design, modeling, and analysis efforts for LO materials, coatings, structures, and integrated mission systems to meet signature reduction and performance requirements.
Independently apply CEM solvers (e.g., FEKO, HFSS, CST, WIPL‑D, xFDTD, or equivalent) to model antennas, apertures, radomes, and LO treatments; perform design optimization and trade studies.
Drive integration of LO treatments with mechanical, thermal, and sensor/antenna system constraints; identify and mitigate producibility, testability, and sustainment risks.
Plan, execute, and oversee laboratory and field tests (anechoic chamber measurements, antenna/radome characterization, RCS measurements); lead data collection, reduction, and validation activities.
Develop and validate predictive models, reconcile simulations with measurements, perform uncertainty quantification, and provide actionable recommendations to engineering and program leadership.
Requirements
Bachelor of Science in Engineering (Electrical, Mechanical or Aeronautical)
Nice to have: electromagnetic theory
Nice to have: advanced data processing
Nice to have: automation of solver workflows
Experienced Low Observables Mission Systems Integration Engineer
Support design and analysis activities for stealth/low-signature systems on Boeing’s Next Generation Air Dominance platforms.
Compensation
Level 3: $112,200-$151,800
Responsibilities
Perform design and analysis tasks for LO materials, coatings, treatments, and structural treatments to minimize radar, infrared, and other signatures.
Develop and validate LO integration concepts for aircraft/vehicle structures and subsystems, including manufacturability and testability considerations.
Use CEM solvers to model, simulate, and optimize LO components and systems.
Perform sensitivity studies and trade-offs across materials, geometry, and integration approaches to meet system-level LO requirements.
Process and analyze measured test data from laboratory and flight/field tests; compare test results to simulation and iterate designs.
Requirements
Bachelor of Science degree in Engineering (Electrical, Mechanical or Aeronautical)
Lead detailed LO design and integration for the RCS pole model, including material selection, incorporation of advanced technologies, supplier hardware integration.
Compensation
Summary pay range: $136,850- $185,150
Responsibilities
Lead detailed LO design and integration for the RCS pole model, including material selection, incorporation of advanced technologies, supplier hardware integration.
Use computational electromagnetic solvers to model, analyze, and optimize radar cross section (RCS) and scattering behavior across required frequency bands and aspect angles in support of pre-test predictions and diagnostics.
Work with Manufacturing to ensure proper alignment between design, analysis and fabrication of LO components.
Define and support fabrication processes, QA checks, and build plans for LO skins, coatings, RAM treatments, and attachments; identify and mitigate manufacturability risks, provide LO liaison support to the shop.
Develop and execute test plans for RCS characterization (anechoic chamber and outdoor ranges), including instrumentation, calibration, and measurement repeatability considerations.
Requirements
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical)
Bachelor's Degree or Equivalent
Nice to have: Advanced degree (MS/PhD) in a relevant discipline
Support design, analysis, and propulsion subsystem integration of low-observable materials, treatments, and architectures for Next Generation Air Dominance (NGAD) platforms.
Compensation
Summary pay range: $112,200 - $151,800
Responsibilities
Perform design, analysis, and integration activities for LO integration of the propulsion subsystem into an advanced next generation platform, including inlets, nozzle/exhaust, and airframe interfaces
Use CEM solvers to model and analyze RCS, scattering, and signature behavior; iterate designs to meet LO requirements
Apply electromagnetic theory to assess materials, shapes, and structural features that affect signature across relevant frequency bands
Define and execute test plans and validation activities (lab and range) to verify LO performance and support correlation between simulation and measurement
Collaborate with multidisciplinary teams (structures, propulsion, materials, flight test, systems engineering, producibility) to ensure integrated solutions meet performance, manufacturing, and maintainability needs
Requirements
Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
Nice to have: Active Top Secret clearance
RF & High-Frequency Hardware Engineer
Johns Hopkins Applied Physics Laboratory · Posted Nov 9, 2026