The contractor will join Client's GMC (Graphics Memory Controller) IP design team, which develops the memory controller IP in Client GPU and data-center accelerator SoCs. Working closely with architects and with the verification, physical design, and firmware teams, the engineer will own design work on GMC blocks from micro-architecture to netlist.
Responsibilities
Develop and review block-level micro-architecture specifications based on architecture requirements
Implement new features and enhancements in Verilog/SystemVerilog RTL, and maintain and extend existing design blocks
Run and close front-end quality checks (lint, CDC/RDC, synthesis)
Support timing closure and area/power optimization with the physical design team
Debug block-level and IP-level simulation failures with the verification team
Plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products.
Responsibilities
Plan, design, optimize, verify, and test electronic systems
Bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems
Requirements
Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field
Nice to have: Knowledge of tensilica
Nice to have: Sub-system verification with tensilica
Partner directly with customers to analyze their current verification flows, identify bottlenecks in simulation, debug, and coverage closure, and map opportunities for AI-assisted acceleration.
Compensation
Base Salary Range: $184800 - $277200
Responsibilities
Partner directly with customers to analyze their current verification flows, identify bottlenecks in simulation, debug, and coverage closure, and map opportunities for AI-assisted acceleration
Design and deploy proof-of-concept workflows that integrate Synopsys VCS, Verdi, and Verification IP with LLM-based copilots and intelligent automation agents
Deliver technical demonstrations, benchmarking studies, and adoption roadmaps that show customers how generative AI can improve debug efficiency, testbench productivity, and knowledge discovery
Collaborate with R&D and product teams to translate customer requirements and field learnings into future AI-enhanced capabilities for the Synopsys Verification Platform
Lead technical discussions with verification architects and engineering managers, presenting best practices for UVM methodologies, low-power verification, and protocol-based testbenches
Requirements
MS or PhD in Electrical Engineering or Computer Science
Own end-to-end SoC design bring-up on ZeBu emulation platforms, from RTL ingestion through synthesis, partitioning, place and route, and runtime execution.
Responsibilities
Own end-to-end SoC design bring-up on ZeBu emulation platforms, from RTL ingestion through synthesis, partitioning, place and route, and runtime execution
Diagnose and resolve complex tool issues across the emulation flow including synthesis failures, FPGA fabric mapping bottlenecks, routing congestion, and runtime performance degradation
Perform deep waveform-level debugging in Verdi to isolate RTL bugs, protocol violations, timing issues, and functional mismatches between simulation and emulation
Act as the primary technical point of contact between customers, field Application Engineers, and Synopsys R&D to drive root-cause analysis and deliver fixes or workarounds under tight timelines
Build Python, Tcl, and Shell automation scripts to streamline debug workflows, accelerate triage, and solve recurring operational problems across customer engagements
Requirements
Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or equivalent hands-on experience in SoC design or verification
Join the Functional Safety & Cyber Security team within GlobalFoundries' IP, Software & Custom Silicon organization, working on safety architecture and safety analysis for our ARC MIPS processor IP. You will own the hardware safety analysis for these products, contribute to the design of safety mechanisms, and defend that work in front of automotive customers and third-party assessors.
Compensation
The exact Salary will be determined based on qualifications, experience and location.
Responsibilities
Own hardware safety analysis for processor IP configurations: FMEDA, DFMEA, DFA and FTA, through to external assessment.
Perform SoC-level safety analysis for Custom Silicon programs: integration of safety elements, system-level FMEDA, and the safety concept at the SoC boundary.
Analyze dependent failures and freedom from interference across IP boundaries within an SoC.
Derive and track safety metrics (SPFM, LFM, PMHF) and drive diagnostic coverage improvement together with the STL and verification teams.
Define and review safety mechanisms at RTL level — ECC, parity, lockstep, register protection, watchdog — and verify they meet the claimed diagnostic coverage.
Requirements
Master's or Bachelor's degree in Electrical/Electronic Engineering, Computer Engineering or a related field
Nice to have: ISO 26262
Nice to have: IEC 61508
Nice to have: Safety Element out of Context (SEooC) supplier experience
Nice to have: Fault simulation tooling (VC Z01X or equivalent)
Join a dynamic group dedicated to ensuring robust test infrastructure for cutting-edge hardware solutions. Our team collaborates closely with design and product development teams, playing a pivotal role in the integration and validation of test logic throughout the development lifecycle.
Responsibilities
Drive comprehensive test planning and develop advanced test benches to ensure design integrity
Collaborate with cross-functional teams to integrate and validate test logic at every phase of implementation
Utilize scripting and debugging tools to streamline verification workflows and identify issues efficiently
Apply expertise to optimize test processes and enhance product quality
Deliver critical verification solutions that directly impact the success and reliability of our products
Requirements
Bachelor’s or Master’s Degree in Electrical or Computer Engineering or any related field
Seeking a motivated and detail-oriented Engineer with a specialized focus on physical synthesis, SDC development, and implementation specifications to join the General Purpose Microcontroller (MCU) Design and Verification team.
Responsibilities
Execute block-level and module-level physical synthesis runs
Drive optimization for area, power, and timing (PPA) during synthesis
Run module-level physical synthesis and perform preliminary technology verification flows
Develop, write, and maintain robust Synopsys Design Constraints (SDC)
Define complex clock definitions, generated clocks, clock group relationships, input/output delays, and false/multi-cycle paths
Requirements
Bachelor’s or Master’s degree in Electrical Engineering, Microelectronics, Computer Engineering, or a related field
The contractor will join AMD's GMC (Graphics Memory Controller) IP design team, which develops the memory controller IP in AMD GPU and data-center accelerator SoCs. Working closely with architects and with the verification, physical design and firmware teams, the engineer will own design work on GMC blocks from micro-architecture to netlist.
Compensation
The hourly rate for this position is between $XX-$XX per hour.
Responsibilities
Develop and review block-level micro-architecture specifications based on architecture requirements
Implement new features and enhancements in Verilog/SystemVerilog RTL, and maintain and extend existing design blocks
Run and close front-end quality checks (lint, CDC/RDC, synthesis)
Support timing closure and area/power optimization with the physical design team
Debug block-level and IP-level simulation failures with the verification team
NVIDIA is seeking a Senior Custom SOC/IP Verification Engineer to verify the next generation NVLink Fusion semi-custom silicon.
Responsibilities
Responsible for ASIC design verification for various IPs at IP and SOC levels
Responsible for reference model development and integration
Participate in IP/SOC architecture, micro-architecture reviews, interface with Architecture, SW/FW, Design, and Modeling to work out comprehensive first-time right verification plans
Contribute to the innovative verification methodology development, functional and code coverage closure
Work on the complex TB creation, direct/random tests and drive the function and coverage to closure
Requirements
B.S. or M.S. degree in Computer Engineering or Electrical Engineering